Congratulations on your purchase of the ecx ® tor- ment ™ brushless short course truck. This 1/10-scale model introduces you to the sport of rc driving. Herzlichen glückwunsch zum kauf des ecx torment brushless short course truck. Dieses 1/10 scale model öffnet ihnen die welt des rc car sports. Nous...
2 en torment brushless brushless notice all instructions, warranties and other collateral documents are subject to change at the sole discretion of horizon hobby, inc. For up-to-date product literature, visit http://www.Horizonhobby.Com and click on the support tab for this product. Safety precautio...
3 en torment brushless brushless water-resistant vehicle with waterproof electronics your new horizon hobby vehicle has been designed and built with a combination of waterproof and water-resistant components to al- low you to operate the product in many “wet conditions,” including puddles, creeks, w...
4 en torment brushless brushless components vehicle preparations 1 charging the vehicle battery 1. Connect the ac power cord to the power slot on the charger, then connect the other end of the power cord to an ac power source. 2. The power led and charging led will turn green when the charger is con...
5 en torment brushless brushless • never install damaged batteries. • never install batteries of mixed types or of different ages in the transmitter. • always remove exhausted batteries. • always remove batteries before storing the transmitter. • low battery power can result in loss of control of th...
6 en torment brushless brushless transmitter controls battery level indicator solid green: battery voltage is good (above 4v). Flashing green: battery voltage is critically low (below 4v). Replace batteries. Throttle trim adjusts the neutral point of the electronic speed control. Steering trim adjus...
7 en torment brushless brushless getting started 1. Power on the transmitter. 4. Do a test of the transmitter’s control of the vehicle with the vehicle’s wheels off the ground. 5. Start driving slowly, and, if the vehicle does not go straight, adjust the steering trim dial on the transmitter. 3. Pow...
8 en torment brushless brushless • always turn on your transmitter before you turn on the receiver in the vehicle. Always power off the receiver before turning your transmitter off. • always operate your vehicle in a wide open area. Operating the vehicle in a small space or indoors can cause overhea...
9 en torment brushless brushless maintenance setting the gear mesh the gear mesh has already been set at the factory. Setting the gear mesh is only necessary when changing motors or gears. You must remove the vehicle’s gear cover (a) to make this adjust- ment. Proper gear mesh (how the gear teeth me...
10 en torment brushless brushless electrical diagram part # description a dyn4942 motor b dyn1072ec battery 8.4v c ecx13000 waterproof steering servo d spmsr201 receiver e dyn4940 waterproof electronic speed control (esc) f channel 1 g channel 2 ec3 ec3 a b c d e g f for correct operation, channels ...
11 en torment brushless brushless shock cleaning oil-fi lled shocks will require regular maintenance due to the oil breaking down or getting dirty. This maintenance should be performed after about every 3 to 5 hours of use, depending on the conditions that the vehicle is used in. • remove the shock f...
12 en torment brushless brushless binding binding is the process of programming the receiver to recognize the guid (globally unique identifi er) code of a single specifi c transmitter. The dx2e and sr201 are bound at the factory. If you need to rebind, follow the instructions below. 1. With the receiv...
13 en torment brushless brushless what this warranty covers horizon hobby, inc., (horizon) warrants to the original purchaser that the product purchased (the "product") will be free from defects in materials and workmanship at the date of purchase. What is not covered this warranty is not transferab...
14 en torment brushless brushless declaration of conformity (in accordance with iso/iec 17050-1) no. Hh2013050301 product(s): ecx torment 1:10 2wd sct brushless: rtr (spektrum dx2e transmitter and sr201 receiver included) item number(s): ecx03008i equipment class: 2 the object of declaration describ...
Torment brushless brushless 56 m3x10 m3x10 m3x10 m3x12 m3x12 m3x12 m3x12 m3x10 m3x12 m3x12 m3x10 m3x15 m3x12 m3x12 m3x15 m3x15 m3x12 m3x25 m3x10 m3x10 m3x8 m3x18 m3x25 m3x18 10 12 9 3 12 2 4 20 51 51 1 45 30 5 11 7 7 2 2 8 2 7 17 44 45 49 13 46 31 31 20 2 2 16 19 20 8 29 19 23 8 15 15 13 21 23 7 18 ...
Torment brushless brushless 57 33 35 36 25 38 33 35 33 35 33 33 35 38 25 43 m3x15 m3x15 m3x10 m3x12 m3x12 m3x18 m3x10 m3x12 m3x12 m3x12 m3x12 m3x12 m3x12 m3x18 m3x3 m2.5x8 m2.5x4 m2.5x8 m2x16 m2x16 m3x12 m3x10 m3x15 m3x12 m3x12 m3x12 m3x20 m3x10 44 45 17 43 25 47 11 3 13 13 29 20 20 20 28 15 15 13 2...
39650 created 3/2013 © 2013 horizon hobby, inc. Ecx, the ecx logo, torment, dsm, dsm2, dynamite and speedpack are trademarks or registered trademarks of horizon hobby, inc. Wd-40 is a registered trademark of wd-40 manufacturing company. The spektrum trademark is used with permission of bachmann indu...
