E-hss14-i-0517 equipment development co., inc. 100 thomas johnson drive, frederick, md 21702-4600 usa phone: 301-638-3326 • 301-663-1600 fax: 800-447-3326 • 301-663-1607 edcoinc.Com • sales@edcoinc.Com hss-14 manual - portable operator’s instruction manual 14” gasoline powered masonry saw note: show...
E-hss14-i-0517 page 2 800-638-3326 • edcoinc.Com • sales@edcoinc.Com read and understand the operators instruction manual thoroughly before attempting to operate this equipment. Death or serious injury could occur if this machine is used improperly. Extreme care must be taken when operating electric...
E-hss14-i-0517 equipment development co., inc. Page 3 800-638-3326 • edcoinc.Com • sales@edcoinc.Com hss-14 14” hardscape saw safety/warnings......................................................................................................2 specifi cations/table of contents..........................
E-hss14-i-0517 equipment development co., inc. Page 4 800-638-3326 • edcoinc.Com • sales@edcoinc.Com safety guidelines eye and ear protection must be worn at all times while the hss-14 is in use. During normal opera- tion, sound pressure levels exceed 85dba. Use only ansi approved safety glasses to ...
E-hss14-i-0517 equipment development co., inc. Page 5 800-638-3326 • edcoinc.Com • sales@edcoinc.Com diagrams shown with honda cyclone dual-filter element engine as an example. Consult the engine manufacturer’s owner’s manual for information on specifi c models. Operating instructions a. Spark plug l...
E-hss14-i-0517 equipment development co., inc. Page 6 800-638-3326 • edcoinc.Com • sales@edcoinc.Com before starting engine: • read and understand the instructions supplied by the engine manufacturer. • familiarize yourself with all engine and saw controls. • visually inspect the entire machine for ...
E-hss14-i-0517 equipment development co., inc. Page 7 800-638-3326 • edcoinc.Com • sales@edcoinc.Com starting the engine: • be sure blade is clear of item to be cut. • determine that the recoil starter assembly turns freely, starter rope pulls easily, and the rope retracts properly. • follow the ins...
E-hss14-i-0517 equipment development co., inc. Page 8 800-638-3326 • edcoinc.Com • sales@edcoinc.Com look for “direction of rotation” markings on the new blade. (usually an arrow stamped on the blade.) place new blade on the arbor shaft verifying that the markings on the blade follow the proper dire...
E-hss14-i-0517 equipment development co., inc. Page 9 800-638-3326 • edcoinc.Com • sales@edcoinc.Com belt adjustment and replacement: • periodically check to be sure the belts are undamaged and that they are at the proper tension. Slipping belts will overheat causing the cutting speed to be limited ...
E-hss14-i-0517 equipment development co., inc. Page 10 800-638-3326 • edcoinc.Com • sales@edcoinc.Com change engine oil: • check engine oil before each operation. Open the fi ller cap and look at the dip stick. (figure 15) oil should be clearly visable both on the stick and in the cavity and should l...
E-hss14-i-0517 equipment development co., inc. Page 11 800-638-3326 • edcoinc.Com • sales@edcoinc.Com maintenance schedule this is for a quick reference to the information supplied in the maintenance portion of this manual. Repairs are to be done by authorized edco dealers only. Read and follow inst...
E-hss14-i-0517 equipment development co., inc. Page 12 800-638-3326 • edcoinc.Com • sales@edcoinc.Com limited equipment warranty of sale – terms & conditions equipment development company, inc. Herein referred to as edco (seller) warrants that each new unit manufactured by edco to be free from defec...
