Edco MP390B User manual - page 5
0-120 min, and the step interval of 10 min. The sleep mode shall be valid under all other
modes than the USB mode.
5. Memory info: Displays the total capacity and the used space percentage of master
disc or SD card of player. To switch between the information stored in two discs use
or
6. Format device: Formats the master disc and the disc where cards can plug in.
CAUTION: Use of this operation will delete whatever is on the master disc.
7. Firmware version: displays the current firmware version information.
8. Firmware upgrade
The player can upgrade or repair the player's firmware through the firmware upgrade tool.
9. Keypad tone: Set the volume level of keypad tone, with a range from 0-24. If the step
length is 1.0, it indicates the keypad tone shall be closed.
10. Exit: back to the main interface of system setting.
Troubleshooting
Media player does not work or LCD does not display contents.
- Check the battery power.
Power key does not work.
- The battery is depleted.
Unable to download files
- Check the connection between computer's USB port and USB cables.
- Format the media player.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux
deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais
fonctionnement de l'appareil.