Operator’s instruction manual tg-10 turbo grinders available in gasoline, propane and electric tg10-i-0915 e-spts-i-0809 equipment development co., inc. Equipment development co., inc. 100 thomas johnson drive, frederick, md 21702-4600 usa phone: 301-638-3326 • 301-663-1600 fax: 800-447-3326 • 301-6...
Page 2 tg10-i-0915 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Read and understand the operators instruction manual thoroughly before attempting to operate this equipment. Death or serious injury could occur if this machine is used improperly. Extreme care must be ...
Page 3 tg10-i-0915 e-spts-i-0809 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Operator’s instruction manual tg-10 turbo grinders table of contents how to order repair parts to insure product safety and reliability, always use genu- ine edco replacement parts when ma...
Page 4 tg10-i-0915 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Read and understand all operating instructions before operating this equipment. Death or serious injury can result if this machine is used improperly. Eye and ear protection must be worn at all times wh...
Page 5 tg10-i-0915 e-spts-i-0809 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Operating instructions exhaust from this engine contains carbon monoxide, an invisible, odorless gas that can kill. In addition, it contains chemicals known, in certain quantities, to caus...
Page 6 tg10-i-0915 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Gasoline models: (11 hp honda engine) to start the engine: • tilt the machine back slightly to allow the disc to clear the slab surface. • start the engine according to the directions in the engine manu...
Page 7 tg10-i-0915 e-spts-i-0809 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. To stop the electric model: • tilt the machine to allow the disc to clear the slab surface. • turn rotary switch to the off position or press off button on the starter box. Wet grinding: •...
Page 8 tg10-i-0915 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Comments in paragraph below are in reference to this level adjustment control (figure 6). Note: ensure when leveling the machine as explained below that it (the machine) is sitting on a flat level surfa...
Page 9 tg10-i-0915 e-spts-i-0809 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. For use with quick-change multi-accessory disc double diamond dots: general purpose grind - removes general purpose epoxy, mastics, thinsets, water-proofing coatings and more. Single diamo...
Page 10 tg10-i-0915 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Maintenance follow the engine manufacturer’s guidelines for regular maintenance. Disconnect spark plug lead (figure 10) before performing any maintenance on this machine! Or on the electric model, unpl...
Page 11 tg10-i-0915 e-spts-i-0809 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Maintenance belts: to remove/replace belts: • remove belt cover to expose belts. (figure 14) • loosen engine/motor mounting bolts (figure 15) on both sides of the tg-10 and slide engine f...
Page 12 tg10-i-0915 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Maintenance schedule read and follow the engine manufacturer’s maintenance schedule. Repairs are to be done by authorized edco dealers only. * when applicable. Before operation after first 4 hours ever...
Page 13 tg10-i-0915 e-spts-i-0809 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Grinding/cutting/drilling of masonry, concrete, metal and other materials can generate dust, mists and fumes containing chem- icals known to cause serious or fatal injury or illness, such...
Page 14 tg10-i-0915 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Notes _________________________________________________________________________________________________________________ _________________________________________________________________________________...
Page 15 tg10-i-0915 e-spts-i-0809 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Limited equipment warranty of sale – terms & conditions equipment development company, inc. Herein referred to as edco (seller) warrants that each new unit manufactured by edco to be free...
E-spts-i-0809 800-638-3326 • edcoinc.Com • sales@edcoinc.Com equipment development co., inc. Surface preparation, restoration, professional sawing equipment & hand held tools 100 thomas johnson drive, frederick, md 21702 phone: 800-638-3326 or 301-663-1600 fax: 800-447-3326 or 301-663-1607 email: sa...
