Eddylight DSY-LED252-IP65-RGB User manual - 7. Master/slave Control
• ”FA”: gradual fade mode (FA00-FA15 speed adjustable)
• ”FL”: white strobe/flashing (FL00-FL15 speed adjustable)
• ”r”: red color brightness adjustment mode (r000-r255)
• ”g”: green color brightness adjustment mode (g000- g255)
• ”b”: blue color brightness adjustment mode (b000- b255)
• ”A”: amber color brightness adjustment mode (A000- A255)
• ”W”: white color brightness adjustment mode (W000- A255)
Press MENU to navigate through the main menu. Press ENTER to access
one of the submenus, or the selectable options in that menu. Once a
desired setting has been set, press ENTER to save (when present).
Options are saved even when the power is cycled.
For example, if you want to choose DMX mode A001, operate as follows:
• Press MENU, to go back to the main menu
• Press UP / DOWN until “Addr”
• Press MENU to choose, the display will be blinking
• Press UP / DOWN to change the address code to select “A001”
• Press MENU to select and store the current menu option. DMX mode
will be stored automatically and the screen will stop blinking.
To Select Presets:
(Pr- -)
• Press MENU, to go back to the main menu
• Press UP / DOWN until “Pr--”
• Press MENU to choose, the display will be blinking
• Press UP / DOWN to change the address code to select “pr00”
• Press MENU to select and store the current menu options. This preset
mode will be stored automatically and the screen will stop blinking.
7. Master/Slave Control
The MASTER functions as a master as long as it’s not in DMX mode (and
ideally no cable plugged into the DMX INPUT on the unit). It sends a
signal to the SLAVE through a DMX cable and synchronizes its settings to
it. Do not use more than 20 lamps or 60m of DMX cable.
The SLAVE units should be set to DMX mode and the address code set to
“A001” to receive the MASTER’s signal. Only one light can be set as a
master, but multiple lights can be set as slaves.
7
www.EddyLight.com
1-800-914-3538