Led super par user manual.
1. Introduction 2. Safety information 3. Dimensions and specifications 4. Main function 5. Rear panel display and operation 6. Instructions for manual programming 7. Master/slave control 8. Cable connection.
1. Introduction thank you for purchasing our led super par light. Please read these instructions carefully before operating to avoid any possible damage and accidents caused by misuse. The led super par light has a hydrodynamic aluminum shell. Three colors of high-brightness led lights (red, blue, g...
3. Dimensions and specifications voltage: 100-264 vac ~60hz power: 70w size: 140mm deep x 190mm wide x 240mm high net weight: 1.5 kg rated: ip20 lamp type: (7) pc of ‘5-in-1’ high power 10w led’s lamp life: ~50,000-100,000 hours lamp angle: 25-45 degrees (produces a 5’ dia. Spot of light from a 10’ ...
4. Main function 5 channel mode: channel dmx function notes 1 0-255 red dimming 0—100% 2 0-255 green dimming 0—100% 3 0-32 blue dimming 0—100% 4 0-255 no function 5 0-255 no function 9 channel mode: channel dmx function notes 1 0-255 red dimming 0—100% 2 0-255 green dimming 0—100% 3 0-32 blue dimmin...
5. Rear panel display and operation menu: access the menu or return to a previous menu option up: menu selection or parameter increments down: menu selection or parameter increments enter: select the current menu option 6. Instructions for manual programming menu items: • ”addr”: dmx mode (001-512) ...
(see next page) • press menu repeatedly until “addr” • press up / down to select your desired address (ie. “d017”) • press enter to choose. Creating solid colors: (r, g, b, a, w) • press menu until “r”, “g”, “b”, etc is selected. • press up / down until to change the number (brightness of that color...
7. Master/slave control the master functions as a master as long as it’s not in dmx mode (and ideally no cable plugged into the dmx input on the unit). It sends a signal to the slave through a dmx cable and synchronizes its settings to it. Do not use more than 20 lamps or 60m of dmx cable. The slave...
