Edelbrock 2186 Installation Instructions
Catalog #2186, 2191, 7186, 7193
Rev. 3/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0118
Page 1 of 3
Performer and Performer RPM Intake Manifolds
For Big Block Chrysler V8 Engines
Catalog #s 2186, 2191, 7186, & 7193
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this
installation, it is recommended to have the installation completed by a mechanic. If you have any questions or problems, please call our
Technical
Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at edelbrock@edelbrock.com..
PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the "Part #____" space. THANK YOU.
•
DESCRIPTION:
Edelbrock Performer series intake manifolds are designed for engines operating in the idle to 5500 rpm range. Performer RPM series intake
manifolds are designed for engines operating in the 1500-6500 rpm range. Match Performer or Performer RPM intake manifolds with
recommended carburetors and additional equipment for even greater performance increases.
APPLICATIONS:
INTAKE MANIFOLD
REFERENCE
APPLICATION
2186
B, C
Performer 383: Designed for street 361-383-400 c.i.d. Chrysler V8s that measure 7.75”
across the block. Includes pipe plugs to block EGR for non-EGR applications.
2191
B, C
Performer 440: Designed for street 413-426-440 c.i.d. Chrysler V8s that measure 8.75”
across the block. Will not fit 1962-1964 Max Wedge cylinder heads. Includes pipe plugs
to block EGR for non-EGR applications.
7186
A, C
Performer RPM 383: Designed for street 361-383-400 c.i.d. Chrysler V8s that measure
7.75” across the block. High flow runner design will handle popular stroker
combinations. Will not fit 1962-1964 Max Wedge cylinder heads.
7193
A, C
Designed for street 413-426-440 c.i.d. Chrysler V8s that measure 8.75” across the
block. High flow runner design will handle popular stroker combinations. Will not fit
1962-1964 Max Wedge cylinder heads.
A - Not legal for sale or use on pollution controlled motor vehicles.
B - Stock replacement/street legal in some applications. See “Stock Replacement Parts List for Intake Manifolds” insert, or Catalog for details.
C - Available in additional finishes, such as polished, PermaStar, or EnduraShine. See Catalog for details.
•
EGR SYSTEMS: Edelbrock EGR-equipped Performer manifolds are intended as a direct functionally identical replacement for their O.E.M.
counterparts. All exhaust emissions or emissions related stock components are intended to be retained and functional. Performer RPM intake
manifolds will not accept stock EGR (Exhaust Gas Recirculation) equipment. EGR systems are used on most 1972 and later model vehicles.
Check local laws for requirements. Performer manifolds #2186 and 2191 are packaged with 2 pipe plugs. Install these plugs into the EGR
pad if an EGR valve will not be used in your application.
•
ACCESSORIES & INSTALLATION ITEMS: Major recommendations are listed below. See our catalog for details. To order a catalog, call
(800) FUN-TEAM, or visit www.edelbrock.com.