Edelbrock 5224 Instructions - page 2
©2001 Edelbrock Corporation
Rev. 6/01
PARTS LIST
Edelbrock Corporation
2700 California St.
Torrance, CA 90503
Tech Line: (800) 416-8628
E-Mail: Edelbrock@edelbrock.com
PN
Qty.
Description
25-4049
1
Strut Tower Brace Assembly
22-5224
1
Installation Kit
It may be necessary to periodically tighten the strut tower hardware. This Strut Tower Brace
can be complemented with other Edelbrock Suspension components and Edelbrock IAS
Shocks and Struts. Check with your retailer.
5. Trim the plastic firewall cover to fit with the strut tower brace and install. Slide and bolt the wiper shaft
e. Replace the plastic cowl cover be sure to reconnect the washer fluid line, install the hood
appropriate location. Fasten the fuse block in its bracket and bolt small fuse
6. Check for any interference with the wiring, throttle cable, transmission kick down cable, and hoses.
ASSEMBLY (Continued)