Edelbrock 541583 Installation Instructions
©
2007 Edelbrock Corporation
Brochure No. 63-641580
Catalog #641580, 541583, 641590, & 641593
Rev. 10/07 - AJ/mc
Page 1 of 4
RUSSELL COMPLETE FUEL SYSTEM KIT
FOR CARBURETED VEHICLES
Catalog #641580 & #641583 for Edelbrock Thunder Series
AVS Carburetors
Catalog #641590 & #641593 for Holley or BG Demon Carburetors
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new complete fuel system kit. If you have any questions, please call
our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday - Friday, Pacific Standard Time or e-mail us at
Edelbrock@Edelbrock.com.
❑ 1
Edelbrock Fuel Pump #1791
❑ 1
Russell 8” 60-micron ProFilter with clamp
❑ 1
Edelbrock Electric Fuel Pump Relay Kit #1795
❑ 1
Russell Fuel Feed Line Kit (641580 / 641583
kits include 3” filter)
❑ 2
Russell Carburetor Adapter Fittings (641590 /
641593 kits only)
❑ 2
Russell adapter fittings for fuel pump (3/8” x -6
AN adapter)
❑ 3
Russell straight hose ends
❑ 1
Russell 90° hose ends
❑ 1
Russell 45° hose end
TOOLS & SUPPLIES RECOMMENDED
❑ Basic hand tools
❑ AN Wrenches
❑ Miscellaneous hardware for mounting components
❑ Pipe thread sealant
❑ Drill motor & bits
❑ Multimeter or test light
❑ Wire crimpers or soldering equipment
❑ Wire strippers
❑ Extra wire (Red & Black, 12 gauge & 18 gauge)
❑ Wire terminals & connectors
❑ 10A inline fuse
❑ 1
Russell -6 Tube Seal hose clamp with cover
❑ 20 ft. Russell -6 hose
❑ 10
Russell -6 cushion clamps
❑ 12
Cable ties
❑ 1
Edelbrock fuel pump block-off plate with
gaskets & hardware for small-block Chevrolet
❑ 1
Edelbrock fuel pump block-off plate with
gaskets & hardware for big-block Chevrolet &
Ford/Chrysler/AMC engines
❑ 10 ft. Russell 3/16” Wrap-It wire protective sleeve
❑ 10 ft. Russell 5/16” Wrap-It wire protective sleeve
KIT CONTENTS
WARNING!!!
Gasoline and gasoline fumes are extremely flammable. Work in a well-ventilated area away from open flames,
sparks, or other sources of ignition. Try to contain gasoline when connections are loosened, and clean up any
spills immediately. Failure to do so can result in a fire or explosion.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in
poor performance and engine or vehicle damage.