Edelbrock 66062 Installation Instructions - page 3
Catalog #66062
©2007 Edelbrock Corporation
Page 3 of 3
Brochure #63-66062
Rev. 2/07 - DA/mc
KIT CONTENTS
Catalog #66062
Qty.
Description
Qty.
Description
❑ 1
Manifold left side (A section) #25-9101
❑ 2
Manifold port gaskets
❑ 1
Manifold right side (A section) #25-9102
❑ 2
Connector gaskets
❑ 1
Manifold left side (B section) #25-9103
❑ 12
Lock nuts, cad-plated; 3/8”-16
❑ 1
Manifold right side (B section) #25-9104
❑ 14
Socket head cap screws; 3/8”-16 x 1/4”
❑ 1
Cat. adapter left (3”) #25-9622
❑ 4
Tie wraps; 11”
❑ 1
Cat. adapter right (3”) #25-9623
❑ 20
Split lock washers; 5/16”
❑ 20
Header bolts; 5/16”-18 x 1”
❑ 6
Hardened washers; 5/16” i.d. x 3/4” o.d.
❑ 2
Coupler band clamps
Edelbrock Corporation
2700 California St.
Torrance, CA 90503
Tech Line: 1-800-416-8628
E-Mail: Edelbrock@Edelbrock.com
NOTE: To greatly reduced engine compartment temperature, we recommend the use of Edelbrock ceramic-coated,
stainless steel header heat shields Part #6700. These heat shields not only deflect heat out of the engine compartment
protecting underhood components, but they look great, too.