Edelbrock 68732 Installation Instructions
Catalog #68732, #68733
©2006 Edelbrock Corporation
Page 1 of 3
Brochure #63-68732
Rev. 6/06 - DA/mc
TUBULAR EXHAUST SYSTEM
For 1985 IROC Camaro 305 & 350 C.I.D. V8 T.P.I., Auto &
Standard Transmission (Single Converter)
Catalog #68732, #68733
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new
Tubular Exhaust System (TES). If you have any questions, please contact our
Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at Edelbrock@Edelbrock.com.
TUBULAR EXHAUST SYSTEM: These components are designed as a system to improve the exhaust efficiency of the GM T.P.I. (Tuned Port
Injection) V8 engine. A performance gain can be expected by the installation of the system. This system requires no welding for installation and
retains all O.E.M. emissions equipment.
Suggested Tools Needed for Installation: This vehicle has metric fasteners.
❑ 3/8” ratchet socket set with extensions and universal 13mm and 15mm swivel sockets
❑ Combination set of open-end wrenches
❑ Jackstands, screwdrivers, pliers, crescent wrench, etc.
❑ Liquid penetrant, (GM #1052627) anti-seize compound (GM #5613695)
SPECIAL NOTICE: This Edelbrock Tubular Exhaust System has received an Executive Order number (E.O.#) from the California Air Resources Board
(C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission equipment certification, we have included a silver fan shroud
decal to help testing personnel verify the this part is a legal replacement on the vehicle for which it is cataloged. The adhesive-backed decal should
be affixed next to the existing emission and engine specifications decal. Do not cover any part of your original emission decal.
WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your Edelbrock Tubular Exhaust Systems.
Those products can cause excessive heat and moisture buildup resulting in corrosion and failure of the system.
NOTE: High temperature spark plug wires and boots are recommended to withstand heat from T.E.S.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in poor
performance and engine or vehicle damage.
KIT CONTENTS
Catalog #68732 (Ceramic-Coated), #68733 (Ti-Tech Coated)
Qty.
Description
❑ 1
Header left side #25-9003 (#68732)
❑ 1
Header right side #25-9004 (#68732)
❑ 1
Header left side #25-9007 (#68733)
❑ 1
Header right side #25-9009 (#68733)
❑ 1
Extension pipe right side #25-9508
❑ 1
Extension pipe left side #25-9509
❑ 1
Adapter #25-9510
❑ 1
Umpco clamp; 3/8” I.D.
❑ 1
Umpco clamp; 1-5/8” I.D.
❑ 1
Hex nut; 10-32
❑ 1
Hex capscrew; 10-32 x 1”
❑ 1
Star washer; 3/16” internal
❑ 2
Tube spacer; 5/8” x 1.53
❑ 1
Tube spacer; 5/8” x .72
Qty.
Description
❑ 1
Tube spacer; 5/8” x 1.12
❑ 2
Donut gaskets; 2-1/2”
❑ 1
Flange connector
❑ 1
U-Muffler clamp; 2-1/2”
❑ 1
O2 Sensor pigtail wire
❑ 1
Coolant tube bracket
❑ 2
Chevy V8 port gaskets
❑ 4
Hex capscrews; 3/8” - 16 x 2”
❑ 12
Hex bolts; 3/8” - 16 x 1”
❑ 2
Hex bolts; 3/8” - 16 x 2-3/4”
❑ 12
Split lock washers; 3/8”
❑ 4
AN Flat washers; 3/8”
❑ 1
O2 Sensor plug (if needed)