Edelbrock 70024 Installation Instructions Manual

Summary of 70024

  • Page 1

    Catalog #70024 & 70025 brochure no. 63-0182 page 1 of 6 ©2008 edelbrock corporation rev. 6/08 victor jr. Plate upgrade kits for square flange and dominator carburetors kit #70024 and #70025 installation instructions please study these instructions carefully before installing your new edelbrock nitro...

  • Page 2

    Catalog #70024 & 70025 brochure no. 63-0182 page 2 of 6 ©2008 edelbrock corporation rev. 6/08 installation 1. Install your new victor jr. Nitrous plate using the supplied gaskets on the carburetor pad of your intake manifold. Be sure that one gasket is placed on the pad under the victor jr. Nitrous ...

  • Page 3

    Catalog #70024 & 70025 brochure no. 63-0182 page 3 of 6 ©2008 edelbrock corporation rev. 6/08 jet map information edelbrock engineering has conducted dyno testing with the victor jr. System to provide jetting maps for two separate plates at different jetting levels. These jet combinations are suppli...

  • Page 4

    Catalog #70024 & 70025 brochure no. 63-0182 page 4 of 6 ©2008 edelbrock corporation rev. 6/08 engine operation considerations w hen used correctly, nitrous oxide safely elevates cylinder pressures and temperatures while increasing combustion rate. These characteristics make the engine more sensitive...

  • Page 5

    Catalog #70024 & 70025 brochure no. 63-0182 page 5 of 6 ©2008 edelbrock corporation rev. 6/08 baseline tuning suggestions utilizing nitrous oxide as a power adder is similar to a supercharger or a turbocharger in that it increases the amount of air an engine can get from atmospheric conditions. Ther...

  • Page 6

    Catalog #70024 & 70025 brochure no. 63-0182 page 6 of 6 ©2008 edelbrock corporation rev. 6/08 ignition timing and nitrous because we are oxidizing the air/fuel mix going into the engine when nitrous oxide is used, we must pay close attention to the ignition timing profile. Remember, “nitrous” oxygen...