Edelbrock 70050 Instruction - page 13
2.5
Nitrous Feed Line Mounting
1. Determine the route your main nitrous feed line will follow. Ensure the path does
not route the nitrous feed line too close to the exhaust system, suspension,
electrical lines/components and tires.
2. Attach nitrous supply line to bottle.
3. Feed nitrous line along proposed route.
4. Secure nitrous supply line to underside of vehicle.
Note: Stainless steel covering of the main nitrous feed line is very abrasive.
Shield painted components or sensitive system components like
electrical, fuel lines, brake lines or suspension components to prevent
them from contacting main feed line. Rubber hose can be slid over and
retained as a chafe guard.
5.
Leave nitrous line loose pending installation of nitrous solenoid.
2.6 Solenoid
Mounting
Use the following procedures to install the Performer RPM nitrous solenoid and fuel
solenoid.
Note: Remember to use Teflon paste only on pipe threads. Do not use Teflon tape.
Hint: Placement of the solenoid is often limited by the lack of possible mounting
locations in the engine compartment. However, if possible, observe the following
suggestions:
Solenoid Safety Information
1. Keep solenoid and lines away from exhaust components.
2. Trial fit the solenoids with all lines attached to ensure a proper fit.
3. Solenoids may be mounted sideways or upside-down, if necessary.
2.6.1 Preparing To Mount Your Solenoids
1. Locate the universal solenoid brackets and solenoid mounting screws.
2. These solenoid brackets can be modified to clear almost any potential interference
around the carburetor/plate mounting surface. Please look at the pictures or
potential solenoid mounting locations and adapt your brackets according to the
needs of your particular application.
Pictured here is an unmodified Performer RPM
solenoid bracket with a modified bracket with solenoid
attached, ready for installation on an intake manifold.
The modifications can be performed by clamping the
solenoid bracket in a bench vise, or by using wide jaw
pliers.