EMGA TLC 1598 User Manual - Operation
of
9
926002 en ma 2013
926002 en ma 2013
TLC 1598
English
Parts list:
s
thermometer
s
calibration certificate
s
for accessories see appendix I
3
Operation
3.1
Switching on
the thermometer
To switch the thermometer on, press the
”ON/OFF” button for at least one se-
cond.
The device will perform a system test
during which all segments are visible in
.
y
a
l
p
s
i
d
e
h
t
After this the measuring channel is tested.
The display shows ”38.8”.
Afterwards the first measured value will
appear in °C.
If an error message is displayed,
refer to chapter 4 ”Troubleshooting“
on page 10.
3.2
Temperature measuring
For conserving battery power, the
thermometer will switch off automa-
tically after 2 hours of operation.
Tilt the sensor needle out and place it at
the desired position.