Emilyrose 98900 Assembly Instructions Manual - Natural Gas Conversion
NATURAL GAS CONVERSION
Natural gas conversion must be performed only by natural gas provider
or service company.
1. Disconnect the gas hose from the gas valve. See Figure 6
Figure 6
2. Disconnect the gas tube from the orifice and remove the orifice holder as
shown in Figure 7
Figure 7
3. Replace the propane orifice (See Figure 8) with the natural gas orifice from
the kit and reinstall the orifice holder by tightening the nuts as shown in
Figure 9. Reconnect and tighten the gas tube to the orifice.
Figure 8 Figure 9
Apply a solution of soapy water to all connections to check for leaks. If soap
bubbles continue to form, the connection has a leak. If a leak is found, close
the tank valve and tighten all connections.
NEVER USE A FLAME TO CHECK
FOR LEAKS
8