EMKA db Enline Installation Manual - Using The Db Enline Unit
USING THE db ENLINE UNIT
The configuration of the db En
line unit is done via the DAS-SQL Management Software.
Cabinet Door Identification
The user is first prompted to identify which
cabinet door they are attempting to open.
There are three possible criteria that can be used to identify the
cabinet door a user is attempting to
access:
Row Number
Cabinet Number
Door Number
Row Number and Cabinet Number are optional, where as a Door Number is always required. Thus
the options available are:
Row Number + Cabinet Number + Door Number
Row Number + Door Number
Cabinet Number + Door Number
Door Number only
The number of digits required for each item is set through the DAS-SQL Management Software. The
[ ] (square brackets) indicate the number of digits required. Leading zeros are required to ensure the
correct number of digits, e.g. If the requested Row # is ‘3’ and the required number of digits is two,
the row number should be entered as ‘03’.
# Key Requirement
The db En
line unit can be configured to require a # key to be pressed after each piece of data
entered,
or to automatically proceed to the next menu item, once the required number of digits has
been entered. This is also set through the DAS-SQL Management Software.
7/7/14 12:05
Row # [ ]
7/7/14 12:05
Cabinet # [ ]
7/7/14 12:05
Row # [ 06 ]
db Enline Installation Manual
EMKA, Inc.
Page 6 of 8