1. DL manuals
  2. EMotimo
  3. Professional Video Accessories
  4. Integration Kit for Dana Dolly
  5. Instruction Manual

EMotimo Integration Kit for Dana Dolly Instruction Manual

Summary of Integration Kit for Dana Dolly

  • Page 1

    Emotimo dana dolly integration instructions 1 emotimo integration kit for dana dolly instruction manual v 1.1.

  • Page 2: Contents:

    Emotimo dana dolly integration instructions 2 contents: your dana dolly kit & identifying orientation what’s included general principles / mounting #1 mounting for original track ends, round track, bottom up #2 mounting for original track ends, round track, top up #3 mounting for original track ends...

  • Page 3: Universal Track Ends

    Emotimo dana dolly integration instructions 3 universal track ends top up top up bottom up bottom up round track: original track ends: triangle track: what dana dolly kit do you have?.

  • Page 4: Part Names

    Emotimo dana dolly integration instructions 4 1. Motor mount 1.1 - carriage mount & motor 1.2 - motor cable / plug 1.3 - idler/belt adjustment thumbscrew 1.4 - 1/4-20” flathead screw 1.5 - 1/4-20” metal washer 1.6 - 1/4-20” rubber washer 1.7 - 3/8-16” flathead screw 1.8 - 3/8-16” metal washer 1.9 - ...

  • Page 5: Carriage Mounting:

    Emotimo dana dolly integration instructions 5 carriage mounting: belt routing: belt alignment: belt clamp orientation general principles: 1. Align motor mount over 1/4” and 3/8” through holes on the dana dolly. 2. Mount motor mount to dana dolly using the 1/4-20” and 3/8-16” hardware in the followin...

  • Page 6: General Principles

    Emotimo dana dolly integration instructions 6 general principles clamp mounting pro tip: make sure clamp foot is between screw and track end. The foot allows for greater clamping contact and reduces mounting marks on track ends. Make sure clamp is pressed flat against track end before locking into p...

  • Page 7: General Principles

    Emotimo dana dolly integration instructions 7 general principles spectrum st4 mounting spectrum st4 mounts to arca clamp emotimo clamp riser arca clamp mounts to spectrum base. Bottom mounts to 3/8-16” stud (half ball leveler) half ball leveler (3/8-16” stud) mounts to ball adapter ball adapter moun...

  • Page 8: Orientation #1

    Emotimo dana dolly integration instructions 8 b a c orientation #1 mounting for original track ends, round track, bottom up 3. Belt clamp mounts on top of track ends. Align left and right with belt on motor mount. Use 1/4-20” thumbscrew to lock down. 4. Routing belt: a) wrap belt under and around #4...

  • Page 9: Orientation #2

    Emotimo dana dolly integration instructions 9 b a c orientation #2 mounting for original track ends, round track, top up 3. Belt clamp mounts on top of track ends. Align left and right with belt on motor mount. Use 1/4-20” thumbscrew to lock down. 4. Routing belt: a) wrap belt under and around #4 an...

  • Page 10: Orientation #3

    Emotimo dana dolly integration instructions 10 orientation #3 mounting for original track ends, triangle track, bottom up 3. Belt clamp mounts on top of track ends. Align left and right with belt on motor mount. Use 1/4-20” thumbscrew to lock down. 4. Routing belt: a) wrap belt under and around #4 a...

  • Page 11: Orientation #4

    Emotimo dana dolly integration instructions 11 orientation #4 mounting for original track ends, triangle track, top up 4. Belt clamp mounts on bottom of track ends. Align left and right with belt on motor mount. Use 1/4-20” thumbscrew to lock down. 5) routing belt: a) wrap belt around #4 and #3 pegs...

  • Page 12: Orientation #5

    Emotimo dana dolly integration instructions 12 orientation #5 mounting for universal track ends, round track, top up 1. Wrap belt face down around pulley and under idlers. 2. Slide dana dolly to one end and align belt clamp left and right with motor mount. 4. Belt clamp mounts on bottom of track end...

  • Page 13: Orientation #6

    Emotimo dana dolly integration instructions 13 orientation #6 mounting for universal track ends, round track, bottom up b a c 1. Wrap belt face down around pulley and under idlers. 2. Slide dana dolly to one end and align belt clamp left and right to align belt with motor mount. 3. Lower belt slight...

  • Page 14: Orientation #7

    Emotimo dana dolly integration instructions 14 orientation #7 mounting for universal track ends, triangle track, top up b a c 1. Wrap belt face down around pulley and under idlers. 2. Slide dana dolly to one end and align belt clamp left and right to align belt with motor mount. 3. Belt clamp mounts...

  • Page 15: Orientation #8

    Emotimo dana dolly integration instructions 15 orientation #8 mounting for universal track ends, triangle track, bottom up 1. Wrap belt face down around pulley and under idlers. 2. Slide dana dolly to one end and align belt clamp left and right to align belt with motor mount. B a c 4. Belt clamp mou...

  • Page 16: Emotimo.Com/pages/dana-Dolly

    Emotimo dana dolly integration instructions 16 learn more at emotimo.Com/pages/dana-dolly find us on social media @emotimo #emotimo #spectrumst4 #danadolly #emotimodanadolly get support at support.Emotimo.Com.