Emotiva basX A-100 User Manual - Bas
Page 12
BAS
X
A
-100
Quick Start
In order to get the most from your BASX A-100 amplifier, we urge you to read the entire manual. If
you just want to connect it to a source and a pair of speakers and don’t need to know about all the
triggering options and other features right away, this section will cover the basics you will need to
get started.
• Find a secure location for your A-100.
• Verify that the Line Voltage switch (on the rear panel) is set for the correct voltage.
• Set the Trigger Switch to On, which will configure the A-100 to be switched On and Off
directly by the rear panel AC Power Switch.
• Connect the A-100 to a pair of 8 ohm or 4 ohm speakers using reasonably heavy gauge
speaker wires (at least 18 gauge).
• Connect a line level input source.
• Find some music you really like to listen to.
• Turn on the AC Power Switch and turn up the volume a bit!
• Enjoy!
Consider taking the time to read the rest of this manual while you are comfortably enjoying your
BASX A-100.