Emotiva Gen 2 XPA-2 User Manual - Xpa-2 Rear Panel

Page 8

XPA-2

XPA-2 Rear Panel

1. Trigger Input and Trigger Output

The XPA-2 is switched On (from Standby) when a trigger signal is presented at the Trigger Input; 

the XPA-2 returns to Standby when the trigger signal is removed. When the XPA-2 is on, a 12 VDC 

signal is sent from the Trigger Output to control other devices.

2. Status LED Switch

Disables the front panel status LEDs when set to Off.

3. Meter LED Switch

Disables the multi-segment LED bargraph meters when set to Off.

4., 10. Balanced (XLR) Inputs

Standard XLR connectors (accept line level balanced inputs).

5., 9. Un-Balanced / Balanced Selector Switches

High-quality metal toggle switches independently select between the Unbalanced (RCA) and 

Balanced (XLR) inputs. Up selects the Unbalanced input and Down selects the Balanced input. 

Only one input can be used at once for each channel. (It is allowed to plug in both a balanced and 

an unbalanced source and use the switch to select between them, but only one will be active at 

once.)

3

4

1 2

7

8

5 6

9 10

12

13

11

14

15