Emotiva XPA-1L User Manual - 5. Unbalanced (Rca) Input

Page 8

XPA-1L

4., 10. Negative (-) and Positive (+) Speaker Terminals

Audiophile-grade gold plated five-way binding posts accept banana plugs, lugs, or bare 

wires.

5. Unbalanced (RCA) Input

Solid machined gold-plated RCA jack accepts a line level unbalanced input.

6. Un-Balanced / Balanced Selector Switch

Switches between the Unbalanced (RCA) and Balanced (XLR) input. Up selects the 

Unbalanced input and Down selects the Balanced input. Only one type of input is active at 

once. (It is allowed to plug in both balanced and unbalanced sources and use the switch to 

select between them, but only one will be active at once.)

7. Balanced (XLR) Input

High quality XLR connector accepts a line level balanced input.

8. Status LED Switch

Disables the front panel status LED when set to Off.

9. Trigger Input and Trigger Output

The XPA-1L is switched On (from Standby) when a trigger signal is presented at the Trigger 

Input; the XPA-1L returns to Standby when the trigger signal is removed. When the  

XPA-1L is on, a 12 VDC signal is sent from the Trigger Output to control other devices.

11. Input Voltage Indicator

The XPA-1L automatically detects and switches between 115 VAC and 230 VAC. These 

indicators tell you which line voltage the XPA-1L has detected. 

12. AC Power Switch

Switches the main AC power to the XPA-1L On and Off. When this switch is Off, no controls 

operate (the XPA-1L cannot be turned On from the front panel or by a trigger signal).

11. IEC Power Cord Receptacle

Accepts a standard removable IEC AC power cable (a high-quality commercial power cable 

is included).