EMP-Centauri MS13/4PIU-6 V10 Instruction Manual - page 2
Specification
MS13/4PIU-6
V10
MS13/6PIU-6
V10
MS13/8PIU-6
V10
MS13/12PIU-6
V10
Number of Inputs
13
Number of Outputs 4
6
8
12
Frequency Range
TERR 5-862 MHz (pas), 40-862 MHz (act), SAT 950-2300 MHz
Insertion Loss (avg) TERR 0/12dB(act
/pas), SAT 0 dB
TERR 0/14dB
(act/pas), SAT 0
dB
TERR 2/16dB
(act/pas), SAT 0
dB
TERR 5/19dB
(act/pas), SAT 0 dB
Isolation (min)
20 dB
Maximum Input
level*
TERR 90/100 dBuV (act/pas),
SAT 90 dBuV
Maximum Output
Level*
TERR 90/88
dBuV (act/pas),
SAT 90 dBuV
TERR 90/86
dBuV (act/pas),
SAT 90 dBuV
TERR 88/84
dBuV (act/pas),
SAT 90 dBuV
TERR 85/81
dBuV (act/pas),
SAT 90 dBuV
Control
DiSEqC 2.0
Current Consumption 80 mA (18 V DC) from each satellite receiver
Terr. Input Current
150 mA max (12 V DC)
Power Consumption
6.4 W / 4.1 W (act/pas) + consumption of devices connected to inputs
Dimensions (w,d,h) 47.0 x 15.2 x 8.7 cm (including power supply)
Temperature Range -30°C - +70°C
Specification
MS13/16PIU-6
V10
MS13/20PIU-6
V10
MS13/26PIU-6
V10
Number of Inputs
13
Number of Outputs 16
20
26
Frequency Range
TERR 5-862 MHz (pas), 40-862 MHz (act), SAT 950-2300 MHz
Insertion Loss (avg) TERR 7/21dB(act
/pas), SAT 0 dB
TERR 9/24 dB (act
/pas), SAT 4 dB
TERR 10/25 dB
(act /pas), SAT 5 dB
Isolation (min)
20 dB
Maximum Input
level*
TERR 90/100 dBuV (act/pas),
SAT 90 dBuV
Maximum Output
Level*
TERR 83/79 dBuV
(act/pas),
SAT 90 dBuV
TERR 81/76 dBuV
(act/pas),
SAT 86 dBuV
TERR 80/75 dBuV
(act/pas),
SAT 85 dBuV
Control
DiSEqC 2.0
Current Consumption 80 mA (18 V DC) from each satellite receiver
Terr. Input Current
150 mA max (12 V DC)
Power Consumption
6.4 W / 4.1 W (act/pas) + consumption of devices connected to inputs
Dimensions (w,d,h) 47.0 x 15.2 x 8.7 cm (including power supply)
Temperature Range -30°C - +70°C
* TERR: EN 50083-3/60dB IMA
3
[dBuV]; SAT: EN 50083-3/35dB IMA
3
[dBuV]
avg – average value, there is tolerance of ±4 dB in specified range
min – minimum value, act/pas – active/passive mode of terrestrial band
10 S
ymbols Explanation
certificate of conformity
international standard for digital satellite equipment control, number (1.0, 1.1, 1.2
or 2.0) determines DiSEqC version.
for indoor use only
DC power supply
protective bonding
class II device
fuse protected
safety transformer
According to EU directive, electric and electronic devices which are identified by
one of the following symbols must not be disposed of together with municipal
waste. When disposing of the old device, use local waste collection and separation
systems.
11 Wiring Diagrams
7 z 8
2 z 8