Integrated hybrid tube amplifier model vt-40.2 hybrid tube amplifier owner’s manual.
Safety instructions the lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons. T he exclamati...
2 vt-40.2 integrated tube amplifier front view back view maintenance and cleaning to maintain the amplifier's appearance, it is recommended use of a dry or slightly- damp soft cloth to keep the exterior of the amplifier free from dust, lint or dirt. When cleaning the amplifier, make sure the amplifi...
Vacuum tubes most of the maintenance on your amplifier will involve the vacuum tubes. The tubes used in the vt40.2 are type 6n3. The tubes have a lifespan up to approximately 5 years of outstanding performance depending on usage. Tube wear is gradual and usually goes unnoticed until new replacements...
Choose a location where air can circulate freely around the amplifier. Do not cover the amplifier. Amplifier location 4 attaching speaker wires when using a banana jack to attach speaker wires to the binding post terminals, loosen the top as shown in step 1, and then insert the speaker wire into the...
Top view front side view front and top panels power: the power on/off switch is located on the front face of the amplifier. Volume: the volume can be adjusted using the knob on the top of the amplifier. Make sure the volume is set at a low setting when initially setting up the amplifier. Mode: using...
6 back view using the amplifier (continued) back panel variable line out: headphones or to another amplifier or powered subwoofer aux: stereo input for any device with line out ipod/mp3: stereo input for an ipod or mp3 player input: stereo input for a cd/dvd or any device with a low-level stereo lin...
Specifications *ipod is a registered trademark of apple inc. 7 model amplifier type: ac input: power output: frequency response: distortion (thd): s/n ratio pass band: signal input (analog): line level input sensitivity: dimensions: weight: warranty: vt-40.2 integrated tube hybrid 110v±10%/60hz 40 w...
Troubleshooting the following chart should help isolate some common problems you may encounter with your amplifier. Some are obvious problems you can remedy, but remember, there are no user serviceable parts inside the amplifier. If you cannot identify the cause of the problem using the chart, and a...
Warranty engineered music products “emp tek” warrants the vt-40.2 integrated tube ampli- fier (the "product") to be free from original manufacturing defects in materials and workmanship for one (1) year from date of purchase from an authorized emp tek reseller. This warranty extends only to the orig...
382 marshall way, layton, utah • usa • 84041 toll free: (801) 991-1308 • fax: (801) 543-3300 www.Emptek.Com it is emp tek policy to continuously incorporate improvements into products; all specifications are subject to change without notice. Copyright © 2010 emp tek. All rights reserved..