Outdoor waterproof varifocal color ccd camera note: please read the following before you start the installation..
Safety precautions select a proper location and use safe hoist for installing outdoor color cameras. Confirm that the hoist is capable of lifting to the installation position. Proper protective measures must be provided in the hoist, for protecting engineering staffs. Confirm that power supply is 11...
Connecting chart modulation (for varifocal cameras) 1. Unfasten bolts and open the cover. 2. There’re two triggers for modulating wide, tele and focus. 3. ① for modulating tele and wide, ② for modulating the focus. 4. After modulation, close the cover and make sure bolts are fastened. It is recommen...
Components descriptions 1. Shelter and top shell. 2. The place to fasten on the holder. 3. The modulation cover. 4. The camera and leds. 5. Ac power input. Yellow & green wires connect to gnd. Blue & brown wires connect to the power (ac 110v ~ 240v). 6. Video or rj45 cable output. There’s only one s...
1. Video out analogue bnc video out 2. Reset hardware reset button (press down the button for 3 sec for factory default setting) 3. Lan / wan port 10/100 mbps auto sensing, fast ethernet port for secure local network, or wan for ftth or xdsl connectivity. 4. Di/do the ip camera supports one digital ...
