Eyevis EYE-LCD-8400-QHD-V2-TIRP50AG User Manual - page 34
Installing touch-screen
In this section you will find all information about touch screen installation.
Only for displays variants with touch-screen option:
•
EYE-LCD-8400-QHD-V2-TIRP50AG
Connecting the touch screen
Connecting cables and switching on
Connect the cables and switch on the power in the following order:
1.
Connect the video cable from the computer to the display screen.
2.
Connect power to the display screen and switch on.
3.
Connect power to the computer and switch on.
4.
Plug the power adaptor into a wall socket.
5.
Connect overlay power adaptor into wall socket.
6.
Connect one side of a Type-B USB cable to the USB port on the monitor, as
illustrated below.
7.
Connect the other side of USB cable to the USB port on computer.
ª
The computer then automatically detects the USB device (the touch
frame) and, after a short pause, displays a series of messages on screen.
EYE-LCD-8400-QHD-V2
34
User Manual