1. DL manuals
  2. EYEZONE
  3. Digital Signage
  4. P070-3
  5. User Manual

EYEZONE P070-3 User Manual

Summary of P070-3

  • Page 1

    Eyezone p070-3 user manual o c t 2 6, 0 7 34406f002 1. Package contents……………………..…………………….. 1 2. Introduction………………………………….……………... 1 3. Features…………………………………..………………… 2 4. Hardware overview…………………………….…………... 2 5. Remote control…………………………………………….. 3 6. Setting up……………………………………..……..…….. 4 6.1 slide...

  • Page 2

    1 1. P070-3 5. Audio cable 2. User manual 6. Power adapter (12v, 1.5a) 3. Remote control 7. Protect cover 4. S-video cable the eyezone p070-3 is a digital signage that plays picture, music and video without a computer. It uses media files from cf, sd, mmc and ms (pro) memory card and displays them o...

  • Page 3

    3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 power on/ off mute sound open the setup menu memory card selection show information of the selected file volume up/ down move the cursor confirm the selection/ entry go to the previous/ next page or image display all photo files ...

  • Page 4

    5 6.4 slideshow setup slideshow mode ： set the slideshow to start automatically. Folder repeat ： set all files (picture, music or movie) in the folder to show only once or continuously (loop). Interval time ： set the time each photo is shown to 1, 3, 5, 10, 30 or 60 seconds. Transition (effect) ： se...

  • Page 5

    7 7.2 play music file step 1: press the “music” button on the remote control from any menu. Step 2: the “music library” will show all the music files on the memory card. Use the “ ▲ 、 ▼ ” buttons to select the music file, and press the “enter” button to play the music file. Step 3: press the “next” ...

  • Page 6

    9 7.4 file library step 1 ： press the “file” button on the remote control from any menu. Step 2 ： you can see all the files (including picture, music and movie) on the left panel of the “file library”. Press the “ ▲ 、 ▼ ” buttons to select a file, and the information of the file will be shown on the...

  • Page 7

    11 situation check point no picture 1. Check if the power supply is connected. 2. Make sure the p070-3 is turned on. No response from the remote control 1. Make sure there is a clear view between the remote control and the device. 2. Change the remote control’s batteries. Memory card 1. Push cards g...