EYEZONE P070S-6 User Manual

Summary of P070S-6

  • Page 1

    Eyezone p070s-6 user manual o c t 0 7 , 0 9 3 4 5 3 4 0 0 1 fcc notices it’s herewith confirmed to comply with the requirements of fcc part 15 rules. Operation is subject to the following two conditions: z this device may not cause harmful interference. Z this device must accept any interference rec...

  • Page 2

    2 contents 1. Package contents……………………..……………………….. 3 2. Introduction……………………………….……………………... 3 3. Features………………………………………….……………… 3 4. Hardware overview…………………..………………………... 4 5. Remote control…………………………..…………………….. 5 6. Start the p070s-6……..……………………………………….. 6 7. Setting up……………………………………………………….. ...

  • Page 3

    4 4. Hardware overview 5 5. Remote control 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 power on/ off mute sound open the setup menu memory card selection open the timer setup window volume up/ down move the cursor confirm the selection/ entry go to the previous/ next page or...

  • Page 4

    6 6. Start the p070s-6 power on z insert the memory card that has videos, pictures or music. Z connect the provided power adapter and turn on the power switch, and the p070s-6 will power on automatically. Status after power on z status 1: if the “auto start (all, photo + music, one file repeat or pr...

  • Page 5

    8 auto start: enable/ disable the auto play function after power on. - off: disable the auto start function - all: play all media files on the memory card after power on. - photo + music: play the pictures with music. - one file repeat: repeat only the selected file. - programmed play: set the files...

  • Page 6

    10 8. Using the p070s-6 8.1 usb auto-copy function step1: use the “notepad” to create a file on your pc. Type “autocopy” and named the file “autocopy.Ini” . Step2: put the files that you want to copy and the file“autocopy.Ini” to the usb pen driver. Note: 1. If the file “autocopy.Ini” is not on pen ...

  • Page 7

    12 8.3 programmed play function step1: confirm the programmed play function is enabled. Preferences > → auto start > → programmed play > please restart the p070s-6 after setting, and the p070s-6 will play the file automatically. Step2: press the “stop” button to stop playing, and the file list will ...

  • Page 8

    14 9. Troubleshooting situation check point no picture 1. Check power cable and power switches. 2. Make sure the file format on the memory card is correct. No response from the remote control 1. Ensure that the battery (cr1220 3v lithium battery) in the remote control and it is inserted the correctl...