EYEZONE P102-12 User Manual - page 7
10
Ex. Using the 5 Tags, the number marked on tag is 1, 2, 4, 8 and 16 respectively.
8.1 DEMO FILES
Make 6 demo files (include 1 default file and 5 demo files), and name the default file as
00000_xxx.xxx.
Name the other 5 demo file:
First file:
00001
_xxx.xxx
Second
file:
00002
_xxx.xxx Third file:
00004
_xxx.xxx
Fourth file:
00008
_xxx.xxx Fifth file:
00016
_xxx.xxx
Put the 6 demo files in the memory card, and insert to the P102-12.
8.2 ATTACH THE TAGS TO PRODUCTS
Attach the tag that marked
No. 1
to the first product, and attach the other tags to the
corresponding products.
8.3 PLAY THE DEMO FILE
Confirm the “
RFID
” function is enabled.
“SLIDESHOW SETUP”
→
“AUTO START”
→
“RFID”
Approach the product with tag to the Eyezone P102-12, and the Eyezone P102-12 will play the
corresponding file.
NOTE: The distance of reaction should not exceed 2 centimeters
8. USING THE RFID FUNCTION
11
Situation Check
Point
No Picture
1. Check if the power supply is connected.
2. Make sure the P102-12 is turned on.
No response from
the remote control
1. Make sure there is a clear view between the remote
control and the device.
2. Change the remote control’s batteries.
Memory card
1. Push cards gently and securely.
2. If the card does not insert easily, check the direction.
3. Confirm format of the card.
P102-12 supports CF, SD, MMC and MS (Pro) memory card.
No sound
1. Check if the mute function is on.
2. Check if the volume is turned up.
No Responding while
approaching the tagged
product to P102-12
1. Confirm the “RFID” function is enabled.
(refer to 8.3)
2.
The distance of reaction should not exceed 2 centimeters.
9. TROUBLESHOOTING