EZ Health Thermo Talk IRE-A1 User Manual - page 5
matter if it is at talking or non-talking mode
4. Press
【
Memo.
】
to retrieve the recorded temperature and
Press Hold
【
Memo.
】
for 2 seconds to initiate set up mode.
5. Press
【
/
】
to select Celsius or Fahrenheit.
●
For setup mode:
1. Press
【
Talk
】
to shift between a setting of hour, minute, year, month and date.
2. Press
【
Memo.
】
to increase the digit.
3. Press
【
Memo.
】
subsequently to resume a normal status.
* Unit returns to time mode automatically 1 minute after last key pressed.
2. Memory search mode
●
A search mode can be activated by pressing
【
Memo.
】
at normal time model;
●
"-" is displayed if no data is stored;
●
Search number is shown for stored data available. Maximum storage is 30 sets of data;
●
Press and hold
【
Memo.
】
to increase the digits rapidly;
●
Unit returns to time mode automatically 5 seconds after last
【
Memo.
】
key pressed.
•
For setup mode:
1.
Press
【
Talk
】
to shift between a setting of hour, minute, year, month and date.
2.
Press
【
Memo.
】
to increase the digit and press ”Talk” for confirm.
3.
Press
【
Memo.
】
subsequently to resume a normal status.
Recommendations:
1. For first time users of IR ear thermometer, it is recommended to measure the same ear 3 times. The maximum
reading shall be recorded in case of different results. Any thermometer operating continuously can have a
normal variance of (±0.3 , ±0.5 ).
2. Wait about 30 seconds before measuring the same patient again.
3. For users in sound health, both ears are almost the same in terms of body temperature. If temperature probe is
inserted in at different angles results may vary. You can rely on the results for the ear shows a stable, relatively
higher temperature.
4. Please clean the outer ear before measurement.
Replace a battery
Open the screw on battery lid, insert battery per “+”
Page: 5of8