EzCAP DC60 User Manual - Hardware Installation
USB Video Grabber
Notice:
1. You maybe have to buy some 3.5
”
video and audio cables (Male) if the video and audio cables of device are
not long enough. And you maybe have to buy an S-Video (miniDIN 4PIN) cable.
2. The below devices can be used as analog video sources:
PS2, PS3, W
Ⅱ
, X360, XBOX
,
and all the device has chromatism output.
Quick Installation Chart
Please read the all installation guide clearly.
Please install the device hardware and software following below chart if you
’
re very busy and want to use the
device soon.
Video capture:
Step 1: Insert the CD-ROM to install the drivers and application software.
Step 2: Connect
USB Video Grabber
with analog video source.
Step 3: Connect
USB Video Grabber
with computer.
Step 4: Capture video programs into your computer with VHS to DVD 2.0 SE, and edit them.
Hardware Installation
Note: If you have any antivirus software enabled, please disable it during the installation of the software.