Ezee eZee Bike User Manual - How Ezeebike Works

How eZeebike works

18

Variable Power Assist (VPA) 

In lieu of a throttle, you may 

have received or chosen a potentiometer dial. This set-up is only 

compatible with EPAC mode eZeebikes. 

The dial settings from 0 - 8 correspond accordingly to the level of 

continous power assistance acheived by the motor during  

pedalling. The level of assistance remains the same throughout 

regardless of road conditions until you re-set the dial to another 

position. This is especially useful for long treks or when you do not 

wish to fuss about with a more sensitive throttle.

You can always choose to ride your bicycle as an ordinary bicycle. 

Battery level gauge   

When riding a fully charged 

bicycle, the battery level gauge shows ‘green’. Powerful  

acceleration or uphill riding causes the battery voltage to drop and 

may bring the level gauge to ‘amber’ or even ‘red’ (in the cases of 

very steep hills).

As you continue to cycle and the battery power drops, the level 

gauge will correspond to the state of charge remaining. When it 

remains in ‘amber’ and dips into ‘red’, you have approximately a 

1/3 of the charge left. Best to recharge the battery soon.

To prevent the battery from deep discharge, the controller has a 

low voltage protection cut-off set at 30.0 V. You may reboot the 

bicycle if it cuts off however,

Continued use of an empty battery by ‘pulsing’ will cause 

deep discharge, this is detrimental to the battery and reduce its life.

6