- DL manuals
- EZee Life
- Wheelchair
- CH4050
- Manual
EZee Life CH4050 Manual
Summary of CH4050
Page 1
Model: ch104 model: ch4050 ezee life ™ products 34 futurity gate, unit 15 concord, ontario l4k 1s6 ezee fold portable power wheelchair …................................................
Page 2: Limited Warranty:
Limited warranty: ezee life™ products carry a one year warranty against manufacturing defects, faulty materials and workmanship only. Any alterations, misuse, abuse, or accidental damage voids this warranty. Ezee life™ reserves the right to replace or repair any part that has become defective. The w...
Page 3
I. Guidance for use this manual must be read and understood completely before your first use. If you have dif ficulty in understanding the warnings, notes and instructions in this owner’s manual,or require additional assistance, please contact your authorized provider or distributor to obtain profes...
Page 4
. Product safety symbols the following symbols are used to identify warnings, mandatory actions and prohibited actions. It is essential that you fully understand and completely familiarize yourself with these symbols before operating wheelchair for the first time. Read and follow the instructions pr...
Page 5
. Technical speci fications *will vary with user’s weight, terrain, ground condition, battery condition, temperature and driving style. 5 dimensions (unfolded): l x w x h 34.3 x 12.2 x 36.6 in / 860 x 560 x 930 mm dimensions (folded): l x w x h 22.4 x 12.2 x 26.4 in / 560 x 300 x 670 mm suggested us...
Page 6
Iv. Features 1.Footrest 2. Frame 3. Seat cushion 4. Armrest 5. Backrest cushion 6. Upper backrest 7. Control panel 8. Frame connector block 9. Fender 10. Rear wheel 11. Front caster 12. Electromagnetic brake lever 13. Battery 14. Folding release lever 6.
Page 7
V. Electromagnetic interference warning the power wheelchair may be affected by electromagnetic interference (emi), which may cause damage or interruption to the operation of the chair. It is important for you to understand the instructions which can help you take protective measures against the ris...
Page 8
. Safety usage safety guidelines check all electrical and control connections to ensure they are secured safely and firmly. Check battery levels regularly and ensure the battery is charged immediately when needed. Keep tools and any metal objects away from the negative and positive poles of the batt...
Page 9
Static position when the chair is inactive even for a moment; the power must be off (fig. A2). This will: prevent the control panel from being activated by accidental touch which may cause the chair to move unintentionally. Prevent the chair from electromagnetic interference sources which may activa...
Page 10
Note: when the chair is wet, immediately pull out the battery and allow it to dry naturally. Put the battery back after the chair is completely dried. When operating on wet or frictionless ground surfaces, please carefully move at a slow speed and follow the safety guidelines below: when any of the ...
Page 11
Getting on/off whenever moving your body, it is recommended to have a supporting point that is higher than the seat cushion. To avoid and reduce the chance of falling, please be aware of the followings: before getting on and off the chair, ensure that you lift up the armrest and lower the leg guard....
Page 12
Stationary obstacles navigating over obstacles such as ramps, slopes, curbs, raised or uneven surfaces, pot holes and rough roads can be hazardous. Extreme caution is needed to avoid tipping the chair over. It is important to climb or descend an obstacle slowly, cautiously and perpendicularly. Faili...
Page 13
Load limit max load of the chair: 250lbs (120kg) do not exceed the safe load of the backrest do not press down or lift up the backrest. Under no circumstances should the user do weight training while using the chair. Overloading the chair may cause damage to the chair’s frame, fastened parts and fol...
Page 14
3. As shown in fig. E1 and e2, plug the control plug of the control panel into the socket. E1 e2 viii. Operation guide joystick the joystick comprises of the following: 1) joystick gimbal - controls the direction and speed of the chair. Push the joystick towards the desired direction. 2) power-off b...
Page 15
When the led light flashes intermittently, which indicate speci fic diagnostic troubles referred in the table below: joystick when operating the chair for the first time, it is recommended to move the chair at a low speed gently and gradually pushing the control joystick forward. The practice run wi...
Page 16
16 movement control lever operation forward push the control lever forward backward pull the control lever backward right push the control lever to the right left push the control lever to the left stop release the control lever gradually(the chair will slow down to stop safely).
Page 17
Ix.Braking after any adjustment, repair or maintenance, check all components and parts for tightness before use, otherwise damage or injury may occur. Pushing down the brake as the arrow indicates can lock the chair. Pulling upward the brake as the arrow indicates can unlock the chair. Electromagnet...
Page 18
. Battery do not use batteries with different amp-hour (ah) capacities. Do not mix use of old and new batteries. Always replace both batteries at the same time. Keep tools and other metal objects away from battery terminals. If contacted, shortcircuit or electric shock may occur and cause injury. Av...
Page 19
Always ensure the battery is fully charged before use. The regular charging time is about 5 hours.But if the power is fully run out it may take 10-12 hours to charge fully until the red led on the charger turns green. Thus the recommended charging time for the battery is 8-12 hrs. When not using the...
Page 20
Mounting the battery: 1. Hold the battery and plug in the battery to the battery holder box located below the wheelchair seat(fig. G1). Charging the battery the battery can be charged with normal ac power (ac 110-220 v, 50-60 hz). The charging port is located under the front part of the control pane...
Page 21
Over-discharge protector the lithium battery will be permanently damaged, if the battery’s capacity has been completely discharged. Therefore, wheelchair is equipped with an over- discharge protector. When the lithium battery is running out, the protector will cut off the circuit automatically and t...
Page 22
Xi. Unfolding and folding after any adjustment, repair or maintenance, ensure all components are securely tightened. When lifting the chair, it is strongly recommended to get the user off the chair before lifting or handling the chair. If absolutely necessary to handle the chair and yourself togethe...
Page 23
3. Fix the folding release lever as shown in fig. H3. H3 4. Mounting the joystick 4.1 the control panel is mounted on the armrest. As shown in fig. I1~i3, vertically hold the joystick, align the screw hole of the control panel with the hole on the armrest and screw it tightly and securely. I1 i2 i3 ...
Page 24
4.3 as shown in fig. I5 and i6, insert the plug of the control panel into the socket. I5 i6 5. Fully expanded power wheelchair as in fig.J 24.
Page 25
Folding 1. Release the folding release lever under the chair seat as in fig.K1 and k2 k1 k2 2. Fold the footrest as shown in fig.L1 l1 3. Press the chair tightly following the arrow direction shown in m1 m1 25.
Page 26
4. Press the chair tightly till it fully closed as in figure m3. Xii.Troubleshooting the control panel will display a number of possible trouble conditions by means of the led light.When the led light is green, the chair is trouble-free. When a problem occurs, the led light will flash. When a “troub...
Page 27
27 2 led light flashes the powest level led light flashes: low battery power recharge batteries immediately the secong level led light flashes: the control panel failing to deliver control signal. Reconnect the plugs of the two ends of the control panel cable or replace the control panel. The third ...
Page 28
Xiii. Warranty 28 6 charging control panel damage. Charger plug damaged. Charging plug loosened. Reconnect firmly. 7 faulty connection of the control panel and the battery connector reconnect the 4-pin plug into the battery connector at the side of the chair. Contact customer service to replace cont...
Page 29
Invoice and warranty card are required for service within the warranty period, otherwise all repair costs will be charged. We will repair or replace at our option to the original purchaser, free of charge, any of the warranty included items being examined by an authorized representative of our compa...
Page 30
Xiv. Packing list main wheelchair frame 1 joystick 1 user manual 1 charger 1 storage basket 1 lithium battery 1 (additional batteries ordered separately) imported / distributed by: factory direct medical 34 futurity gate, unit # 15 concord ontario l4k 1s6 local: 416-739-8393 toll free: 855-235-2400 ...