Ezee quando User Manual - Quando

Quando

9

Tools required 

Tools are the first step to proper assembly,  

you will need a

Allen / Hex key metric set

Philips head screwdriver

Open-end flat wrenches metric 

measurements 6mm - 17mm

Seat post   

Insert into the seat tube of the bicycle frame 

and align. Tighten clamps and ensure seat is firmly fastened.

You could raise the seat a maximum of about 4” or 100 mm from 

the lowest position 

Tigtening torque

16 Nm

Do not adjust the seat post beyond its maximum extension  

mark.

Assembly

6

Pedals 

Pedals are marked “L” and “R” 

for left and right respectively. Screw in clock-

wise for the “R” pedal and counter-clockwise 

for “L”. Tighten both with a wrench firmly but 

not excessively as the crank threads are made 

of aluminum alloy.

Front Mudguard 

The supports are    

attached to the sides and top of the front fork.

The mudguards are made of polycarbonate and should not rattle 

when they’re securely fastened.

Brakes 

One of the most important safety features on 

the bicycle. To minimise the risk of injury, its vital to ensure they are

corrected adjusted. Ensure that the V-brake blocks are parellel to 

the rim, and that the distance between them do not exceed 2mm,

Quando