EZiCaddy EZi-3 Digital User Manual - page 13
Page 13
If you have turned off the power when moving and do not want
to start off with the same setting, simply rotate the control knob
about half-a-turn anti-clockwise until the Readout reverts to “0”.
Your trolley will always forget its power setting and revert to
zero if you disconnect the battery.
ADF ( AUTOMATIC DISTANCE FUNCTION ) MODE
Your EZi-3 Digital features a convenient Automatic Distance Function.
This is particularly useful when you want to, say, send off your trolley by
itself towards the next tee whilst you go on to the green. But please be
very mindful of people and obstacles that might end up in your path
Hold down the control button for at least 3 seconds and then release it.
The Power Readout will show “
A
”. Then rotate the control knob to one
of three settings (from 1 through to 3) according to how far you want to
travel. The increments of 1 – 3 correspond to distances of 15 yards,
30 yards and 50 yards approximately. When you next press the control
knob, the trolley will travel for your desired distance at a power setting
of 5 (which can be adjusted instantaneously, should you wish) and then
stop.
PLEASE PRACTICE THIS AT HOME FOR YOUR FIRST FEW
ATTEMPTS !
When you return to your
EZI-3 DIGITAL
it will still remember the power
setting at which you left it and will accelerate to that speed when you
next depress the control button.