EZiCaddy EZi-5 Digital User Manual - page 15
Page 15
Both “Drive” and “Approach” are set to zero on connecting the battery.
To re-set “Drive” to zero, turn off the power to your EZiCaddy by
pressing the Control knob and when the display is already showing
“Drive” press and hold the Left Hand button for about 3 seconds. This
also sets “Approach” to zero.
To measure how far you have driven the ball off the tee, zero the
“Drive” reading and walk directly to your golf ball. You will see the
“Drive” reading increase until you reach your ball.
To re-set “Approach” to zero, turn off the power to your EZiCaddy by
pressing Control knob and then when the display is already showing
“Approach” press and hold the Left Hand button for 3 seconds.
To measure how far your approach will be, zero the “Approach” reading
as you go past the nearest Fairway Distance Marker (make a mental note
of the marker distance reading!). Continue walking to your ball and
subtract (or add) the Approach measurement from the Distance Marker
(according to whether your ball is beyond or before that marker) to give
you the distance to the green.
“Total Distance” cannot be re-set, even if you unplug the battery. It
simply displays the lifetime mileage of your EZiCaddy to date including
the in-factory testing.