Summary of GH3000
Page 1
Gh3000 user manual v1.0
Page 2: Contents
Version 1.0 page 2 ezitrak ® gh3000 user manual contents 1 preface ........................................................................................................................................................... 5 1.1 introduction .............................................................
Page 3
Version 1.0 page 3 ezitrak ® gh3000 user manual 8.2.1 basic parameters.............................................................................................................................................. 15 8.2.2 cycle call method ...............................................................
Page 4
Version 1.0 page 4 ezitrak ® gh3000 user manual 25.2.6 configuration of filter ....................................................................................................................................... 26 25.2.7 configuration of man-down options ............................................
Page 5: 1 Preface
Ezitrak ® gh3000 user manual version 1.0 page 5 welcome! Thank you for purchasing our device! We hope it will satisfy your expectations and you will enjoy its particular features. Please find several minutes to read this document before starting to use gh3000. 1 preface 1.1 introduction gh3000 is a ...
Page 6: 3 Getting Started
Ezitrak ® gh3000 user manual version 1.0 page 6 2.2 defaults the device automatically saves its position data in to the memory and has other default configuration. Periodical logging interval every 20 sec. Configuration password 0000 device name rojone agps option enabled alarm method gprs and sms a...
Page 7
Ezitrak ® gh3000 user manual version 1.0 page 7 if an unsuitable sim card has been inserted or the device fails to detect it, the device will restart automatically and will try to make the connection again (if the sim card is not inserted then the device will restart three times). If the connection ...
Page 8
Ezitrak ® gh3000 user manual version 1.0 page 8 4 getting to know the device 1. Led indicators - indicates the status of device. 2. Speaker 3. Icons 4. Alarm button - activates the alarm function. 5. End call button - turn device on and off, cancel call. 6. Volume up button - increasing speaker volu...
Page 9
Ezitrak ® gh3000 user manual version 1.0 page 9 5 quick device configuration via sms you can configure the device by sending special sms commands. If an sms command has been received and accepted then the device will reply with a special confirmation sms, otherwise the device will not reply at all. ...
Page 10
Ezitrak ® gh3000 user manual version 1.0 page 10 5.3 change periodical data logging by default device is logging its position in the memory every 20 seconds. We recommend that the logging period is not set under 5 seconds as this will use more data as more records are sent to the server. You can cha...
Page 11
Ezitrak ® gh3000 user manual version 1.0 page 11 5.5 change keyboard settings every key on the device keyboard has a number and can be configured to make a call to the determined phone number. By default key1, key2, key3 and key4 do not have any set functions. The key5 is already set to turn alarm o...
Page 12
Ezitrak ® gh3000 user manual version 1.0 page 12 5.8 battery charge level notification if you would like to be informed about the battery charge level then the battery notification function has to be configured first. By default this function is on and set to 10%, but you need to set the message des...
Page 13: 6 Device Monitoring
Ezitrak ® gh3000 user manual version 1.0 page 13 6 device monitoring 6.1 review device location on the map step 1 you can use the free map through the ezitrak® web site by going to www.Ezitrak.Com:8090/maps/locator.Php alternatively you can install google earth from the internet. It can be found at ...
Page 14: 7 For Your Safety
Ezitrak ® gh3000 user manual version 1.0 page 14 7 for your safety please read these basic recommendations. In disregarding them you may face danger or trespass existing laws. In case you wish to have more information, please read the brief user manual. 7.1 switch on safely do not switch on the devi...
Page 15: 8 Alarm Function
Ezitrak ® gh3000 user manual version 1.0 page 15 7.11 safely disconnect the device the device may be disconnected from the pc or charger by pulling out the usb cable from the computer usb socket or by pulling out the micro usb cable from gh3000. To avoid mechanical damages, it is advisable to carry ...
Page 16: 9 Call Function
Ezitrak ® gh3000 user manual version 1.0 page 16 8.2.3 gprs or sms method to configure this alarm method you need to configure data logging period, alarm duration time, sms messages sending period and create a phone number list. Basically this method works only with gprs, sms method helps if there a...
Page 17: 14 Sms Tracking
Ezitrak ® gh3000 user manual version 1.0 page 17 11 authorised incoming call the device has an authorised call telephone number list. It will reject all incoming calls if the authorised call number list is enabled and there are no numbers listed. If there are numbers on the list, then only the phone...
Page 18: 15 A-Gps Function
Ezitrak ® gh3000 user manual version 1.0 page 18 15 a-gps function assisted gps, generally abbreviated as a-gps, enhances the start-up performance of a gps satellite-based positioning system under poor gps visibility conditions (when only 2 satellites are visible). In all other cases a-gsp may lead ...
Page 19: 20 Minute Minder
Ezitrak ® gh3000 user manual version 1.0 page 19 20 minute minder the device beeps every minute, thus informing you of the call duration. 21 parking function this function allows you to know if your assets are moving out of its safety zone. This function is like an auto geo-fence where an invisible ...
Page 20: 24 Special Sms Requests
Ezitrak ® gh3000 user manual version 1.0 page 20 24 special sms requests special requests – these are special text messages which check the gh3000 device’s status and provide response via sms to the requesting person. Example: the requesting person sends an sms with the content fix? The device recei...
Page 21
Ezitrak ® gh3000 user manual version 1.0 page 21 25 sms configuration protocols device configuration via sms messages device has unique ability to communicate through sms without any physical connection. Device configuration can be changed via sms messages. There are 2 types of configuration: fast (...
Page 22
Ezitrak ® gh3000 user manual version 1.0 page 22 25.1.4 change alarm settings there are three alarm modes in which device can work: m1 – sms mode, m2 – call mode and m3 – gprs or sms mode. For more details about these modes please read chapter alarm function. Note! Alarm duration time will be set in...
Page 23
Ezitrak ® gh3000 user manual version 1.0 page 23 25.1.7 change parking settings the minimum radius of parking zone is 200 meters. If you use configuration message without the radius, device will set the radius to its default one, or to the radius which was set in the last device configuration. To le...
Page 24
Ezitrak ® gh3000 user manual version 1.0 page 24 25.2 advanced sms configuration 25.2.1 advanced sms writing rules • default configuration password is • sms message length 160 symbols • each command in same message is separated by semicolon—(;) • configuration command from parameters must be separat...
Page 25
Ezitrak ® gh3000 user manual version 1.0 page 25 25.2.4 configuration of periodical tracking by sms settings group configuration command periodical tracking by sms psw:;cfg1;pts:,,;rst action parameter value description enable periodical tracking by sms 0 – 1 enable – 1, disable – 0. Default – 0. Sm...
Page 26
Ezitrak ® gh3000 user manual version 1.0 page 26 call terminated! Name:; time:; 14 – configuration changed configuration changed! Name:; time:; n; 15 – charge battery charge battery! Name:; time:; live:; batlvl:; 16 – cross! Cross! Id:; time:; geozone:;; lat:; lon:; cellid:; default – 1. 25.2.5 conf...
Page 27
Ezitrak ® gh3000 user manual version 1.0 page 27 25.2.9 configuration of alarm settings group configuration command alarm psw:;cfg1;alm:,,,;rst action parameter value description alarm duration time 1 – 2592000 seconds. Default – 300. Pre alarm delay 0 – 65535 seconds. Default – 0. Track saving peri...
Page 28
Ezitrak ® gh3000 user manual version 1.0 page 28 25.2.12 configuration of send alarm by call settings group configuration command send alarm by call psw:;cfg1;am3:,,,,,,, ,;rst action parameter value description no answer time out seconds 10 – 180s. Default – 30 numbers - 5 numbers phone numbers to ...
Page 29
Ezitrak ® gh3000 user manual version 1.0 page 29 sms send: 120 - for key0 122 - for key1 124 - for key2 126 - for key3 128 - for key4 incoming call 0, 64, 66 0 - no action 64 - hang up 66 - normal answer 69 - loud speaker switch active conversation 0, 60 - 64, 69 0 - no action 60 - audio volume up 6...
Page 30
Ezitrak ® gh3000 user manual version 1.0 page 30 25.2.17 configuration of action on call settings group configuration command action on call psw:;cfg1;aoc:,;rst action parameter value description function 7, 20, 24, 30, 31, 40, 75, 80, 81, 90, 91, 110, 111, 112, 113, 114, 130, 131, 132, 133, 134 7 –...
Page 31
Ezitrak ® gh3000 user manual version 1.0 page 31 25.2.19 configuration of connections & data (gprs) settings group configuration command gprs psw:;cfg1;gprs:,,,,;rst action parameter value description enable gprs 0 – 1 enable – 1, disable – 0. Default – 0. Hold server connection alive 0 – 1 enable –...
Page 32
Ezitrak ® gh3000 user manual version 1.0 page 32 3 – led & audio 4 – vibrator 5 – led & vibrator 6 – audio & vibrator 7 – led, audio & vibrator incoming call 0, 7 0 - disable 1 – led 2 – audio 3 – led & audio 4 – vibrator 5 – led & vibrator 6 – audio & vibrator 7 – led, audio & vibrator outgoing cal...
Page 33
Ezitrak ® gh3000 user manual version 1.0 page 33 10 – audio & sms 11 – led, audio & sms 12 – vibrator & sms 13 – led, vibrator & sms 14 – audio, vibrator & sms 15 – led, audio, vibrator & sms low battery level 0 – 100 low battery level 0 – 100. Default – 40 (%). Critical battery level 0 – 100 critic...
Page 34
Ezitrak ® gh3000 user manual version 1.0 page 34 25.2.23 configuration of date and time settings group configuration command date and time psw:;cfg1;time:,;rst action parameter value description change time zone (daylight saving disabled) -12 up to +13 e.G. 3.5 is gmt +3:30 (tehran). Default – 0 cha...
Page 35
Ezitrak ® gh3000 user manual version 1.0 page 35 25.2.26 configuration of sms table settings group configuration command psw:;cfg1;st:,,,,;rst action parameter value description id number 0, 2, 4, 6, 8 sms id number: 0 – for key0 or for first function 2 – for key1 or for second function 4 – for key2...
Page 36: 26 Status Indicators
Ezitrak ® gh3000 user manual version 1.0 page 36 26 status indicators if you wish to find out in which mode and what the device is doing at the time, observe as carefully as possible the status of the three indicators. Each status indicator consists of 2-colored led’s - one of which is indicating a ...
Page 37: 27 Device Characteristics
Ezitrak ® gh3000 user manual version 1.0 page 37 27 device characteristics 27.1 specifications of the device specification gps receiver ublox 50-channels sensitivity indoor gps: -160 dbm internal antenna patch gsm frequencies dual-band 900/1800 or 850/1900mhz vibro yes keyboard 5 keys keyboard lock ...
Page 38: 28 Maintenance And Repair
Ezitrak ® gh3000 user manual version 1.0 page 38 27.2 battery life time transmissions per 24 hr. 1440 24 1 1440 fixes per 24h 17280 480 24 1440 duty cycle 100% 27% 10% 90% life time (hr.) 4 96 250 >6 27.3 electronic specification parameter min.(avg.) norm. (avg.) max. (avg.) supply voltage 4.5v dc 5...
Page 39
Ezitrak ® gh3000 user manual version 1.0 page 39 all these recommendations are equally important for your device, battery, charger and any other supplement. If any of the devices do not function properly, bring it for examination to the nearest authorised repair centre. This sign on the packaging me...