Ezon SHS-3120 User Manual - Basic Functions

13 

Basic Functions 

This section describes the ways to initialize the information registered in the door 

lock, to register the password and card data, and to open or close the door. 

Initialization 

(Master Password, Password and Card) 

All registered data (master password, password and card) are deleted. After 

initialization, the master password is set to '1234', and the registered password and 

card data are all deleted. 

1. Opening the Cover (from inside) 

Open the battery cover on the indoor unit. 

2. Pressing the [Set] Button (from inside) 

Press and hold the [Set] button for 10 

seconds or longer. 

- Successful: "Toot-->Toot, toot-->Toot, toot, toot, 

toot' sounds are generated. 

3. Entering the Master Password (from outside) 

Enter the master password (press 1234 when 

initialized), and then press the [¾] button. 

- Successful: "Too~~~t" sound is generated. 

- Failed: "Toot~" sound is generated. 

After initializing the registered data, reregister the card and password. 

Initialization is available while the door is open.