Ezviz T1 Quick Start Manual - page 80
of
85
74
Setting the Sensitivity
Adjust the terminals 1 and 2 of SW2 on the board to adjust the sensitivity:
Sensitivity
Terminal 1
Terminal 2
High
OFF
OFF
Medium
(Recommended)
ON
OFF
Low
OFF
ON
Lower
ON
ON
Turning on/off the LED Indicator
Adjust the terminal 4 of SW2 on the board to turn on/off the LED indicator:
Turn on terminal 4 and the LED indicator blinks when alarm occurs;
Turn off terminal 4 and the LED indicator remains unlit when alarm occurs.