Ezviz Vault Live Quick Start Manual - Setup
3
Setup
Powering on
(Before You Start)
The camera should be within 10m from the Vault Live.
1. Connect Power Socket and Vault Live with power adaptor to power on the Vault Live.
Use stable power supply to avoid device exception or even damage.
2. (Only for First Time Access)
Wait untill the Wizard interface appears on the Monitor and change the
password.
The defalut password is the verification code pasted on label of Vault Live.
4. Log in the Vault Live.
5. Power on the camera(s).
Linkage
Linking to Camera
Quick Linkage for Wi-Fi Camera
(Before You Start)
Restore the camera if it has been connected to Wi-Fi before.
Option 1:
1. Go to Camera Management by Menu>Camera.
2. When camera is ready to connect Wi-Fi, click Search. The camera will automatically connect to
the Vault Live .
3. Add the linked camera
.
Power Socket
Power Adaptor
Within 10m