F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00 Administrator's Manual - page 238
236
B.2.1
Creating a Scoped Receive Connector
The connector can be created from the Exchange management shell.
Run the following command to create a scoped receive connector on the
local server:
New-ReceiveConnector -Name
-AuthMechanism Tls -PermissionGroups "AnonymousUsers"
-RequireEHLODomain $false -RequireTLS $false
where:
is the name for the connector,
is the IP address and port number
(separated by a colon) that the receive connector listens for
inbound messages, and
is the IP address or IP address range from
which inbound connections are accepted.
The IP address or IP address range can be entered in one of the
following formats:
IP address: 192.168.1.1
IP address range: 192.168.1.10-192.168.1.20
IP address with subnet 192.168.1.0 (255.255.255.0)
IP address by using Classless Interdomain Routing (CIDR)
notation: 192.168.1.0/24
For example, to create a new connector that listens on all configured local
IP addresses and accepts connections from the local host only, run the
following command in the Exchange management shell:
New-ReceiveConnector -Name "F-Secure alerts and reports"
-Bindings 0.0.0.0:25 -RemoteIPRanges 127.0.0.1 -AuthMechanism
Tls -PermissionGroups "AnonymousUsers" -RequireEHLODomain
$false -RequireTLS $false