F-SECURE PSB - ADMINISTRATORS GUIDE FOR CUSTOMERS Manual - Frequently Asked Questions
You can set default profiles separately for workstations and servers. These profiles are applied
to new computers that you add to the system. If you do not set any default profiles, the system
default profiles are applied to computers.
To set a default profile:
1.
On the Security Profiles page, click
Set default profiles
.
2.
Select a profile that you want to set as the default profile.
3.
Select whether you want to set the profile as a default profile for servers or workstations.
To do this, select one of the following options:
•
Default profile for workstations
•
Default profile for servers
4.
Click
Update
.
In the Default profiles column, you can view the profiles that you selected as the default
profiles. They are applied to new computers that you add to the system.
Resetting default profiles
If you have set your own default profiles for remote computers, but you want to restore the system
default profiles, reset the default profiles.
To reset the default profiles:
1.
On the Security Profiles page, click
Reset default profiles
.
2.
Click
Reset default profiles
.
Your own default profiles are cleared from the Default profiles column, and the system default
profiles are shown instead. The system default profiles are applied to new computers that
you add to the system.
Frequently asked questions
This chapter answers the most frequently asked questions.
If you do not find answers to your questions here, please contact support.
F-Secure PSB Administrator's Guide |
37