1. DL manuals
  2. F.u.n.k.e.
  3. Transceiver
  4. 833-II-(Axxx)-(Axxx) series
  5. Operation And Installation

F.u.n.k.e. 833-II-(Axxx)-(Axxx) series Operation And Installation

Manual is about: VHF Communication Transceiver

Summary of 833-II-(Axxx)-(Axxx) series

  • Page 1

    F f.U.N.K.E. F.U.N.K.E. Means – fabrication · utilities · network · know-how · engineering operation and installation (dokument-nr. 01.143a.010.71e) p/n 833-ii-(axxx)-(axxx) atr833a-ii-oled vhf communication transceiver.

  • Page 3

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 2 change history revision date description of change 1.00 04.04.2018 first release head-sw 1.05 / nf-fw 3.00 list of service bulletins (sb) service-bulletins are to be inserted in the manual and...

  • Page 4: Content

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 3 doc.-no. 01.143a.010.71e / revision 1.00 content 1 general .......................................................................................................................................... 5 1.1 s ymbols .......................

  • Page 5

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 4 4.1 a dvice and t ips ........................................................................................................................................ 37 4.2 t elecommunication d ata ....

  • Page 6: 1  General

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 5 doc.-no. 01.143a.010.71e / revision 1.00 1 general this manual contains information about the physical, mechanical and electrical characteristics, as well as information about installation and operation of the aeronautical vhf voice ...

  • Page 7: 1.3  Customer Support

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 6 1.3 customer support in order to facilitate a rapid return of shipments in case of repairs, please follow the instructions of the input guide “reshipment rma” provided at the service-area with...

  • Page 8: 2  Operation

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 7 doc.-no. 01.143a.010.71e / revision 1.00 2 operation 2.1 overview of controls position and naming of control elements: the control elements have following functionality: i/o on/off switch on press button for appr. 0,5 s swich off pre...

  • Page 9: Atr833-II

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 8 cursor 1. Marking (underline) of value for adjustment; value changeable with frq or vol/sel  enter and continue with cursor button  short press 2. Activates in mem menu the entry of names 3....

  • Page 10: 2.3  Display

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 9 doc.-no. 01.143a.010.71e / revision 1.00 2.3 display the atr833a-ii shows the frequencies and the operating condition on a matrix lcd display with 128 x 64 pixels. Display meaning remark act fixed label for active frequency sby label...

  • Page 11

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 10 display meaning remark te transmission ended automatically after 35 seconds of continuous transmission release ptt shortly and press again to re-enable transmission. Vol 03 volume level for r...

  • Page 12: 2.4  Frequency Setting

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 11 doc.-no. 01.143a.010.71e / revision 1.00 2.4 frequency setting frequency setting is always done by the two steps of 1. Entering a new standby frequency to the desired value, and then 2. Interchanging the new standby frequency and th...

  • Page 13: 118.910

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 12 2.4.2 manual frequency input the standby frequency is input by selecting with the ► button which part of the frequency to change, and changing the selected part with the freq rotary knob. The...

  • Page 14: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 13 doc.-no. 01.143a.010.71e / revision 1.00 2.4.3 recall a frequency from the user memory to access the user memory frequency list, press mem once, and select one of the 20 memory entries with the vol/sel turn knob. The selected memory...

  • Page 15: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 14 2.4.4 recall a frequency from the list of the 10 last used the radio automatically keeps track of the last 10 used active frequencies. To access this list, press mem twice, and select one of ...

  • Page 16: Act    118.275

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 15 doc.-no. 01.143a.010.71e / revision 1.00 2.4.5 storage of a frequency into the user memory the active frequency can be stored into any entry of the user memory. This is achieved by a long press of 1,5 seconds on mem. The previous me...

  • Page 17: 118.275

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 16 to assign a name to a memory entry, the appropriate entry must be selected. The next steps follow directly step 4 from above. 5. Change of name entry: a long press of the cursor button  enab...

  • Page 18: 2.5  Basic Settings

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 17 doc.-no. 01.143a.010.71e / revision 1.00 2.5 basic settings to choose between the following settings, use the set button: 1. Vol volume (chosen by default) 2. Sql squelch (noise suppression) 3. Vox voice activated intercom (speech l...

  • Page 19: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 18 2.5.2 sql – squelch (noise barrier) by shortly pressing the set key once, with the help of the rotary knob the squelch level can be adjusted. (note: this is not related in any way to the inte...

  • Page 20: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 19 doc.-no. 01.143a.010.71e / revision 1.00 act 123.450 sby 118.275 vox 3 range: off, 1 - 9 in case of very noisy backgrounds or use of uncompensated microphones, the automatic vox functionality may not work satisfyingly. In these cas...

  • Page 21: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 20 act 123.450 sby 118.275 stl 4 range: 0 - 20 2.5.6 str – volume sidetone right by pressing the set button five times you get access to the str menu. Here the volume of the sidetone for the ri...

  • Page 22: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 21 doc.-no. 01.143a.010.71e / revision 1.00 2.5.8 brt – brightness by pressing the set seven times the brightness of the backlight of the lcd display can be adjusted with the vol/sel turn knob. For devices with an oled display this fun...

  • Page 23: 2.7  Reception

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 22 2.7 reception when receiving, a „rx“ is shown in front of the active frequency. Act rx 123.450 sby 118.275 vol 5 when having dual watch active (see 0) rx can be shown on the standby frequency...

  • Page 24: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 23 doc.-no. 01.143a.010.71e / revision 1.00 every then detected radio signal on the active frequency has priority, and pauses the dual watch monitoring of the standby frequency, as long as the reception/transmission continues on the ac...

  • Page 25

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 24 as soon as no reception is determined on the active frequency, the mutual monitoring between active and standby frequency starts. In order to deactivate dual watch: press dw once more or chan...

  • Page 26: 3  Configuration

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 25 doc.-no. 01.143a.010.71e / revision 1.00 3 configuration a very long press of set (5 seconds) accesses the configuration menu. The configuration menu is used for fundamental settings. To choose between the following settings, use th...

  • Page 27: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 26 8.33 khz: allows input of both 8.33 khz and 25 khz channels act rx 123.450 sby 118.275 spacing 8.33khz 25 khz: allows input of 25 khz channels only act rx 123.450 sby 118.275 spacing 25khz a ...

  • Page 28: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 27 doc.-no. 01.143a.010.71e / revision 1.00 off xxx s: automatic display darkening after xxx seconds after last user interaction (xxx= 10s, 20s, 30s, 60s, 120s) act rx 123.450 sby 118.275 display off 10s reactivation of the darkened di...

  • Page 29: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 28 all mics: both ptt buttons and all microphones are used for transmissions, no matter what ptt button was pressed. Act rx 123.450 sby 118.275 ptt slct all mics one mic: according to the ptt bu...

  • Page 30: 3.4  Duowatch

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 29 doc.-no. 01.143a.010.71e / revision 1.00 3.4 duowatch – dual-watch volume reduction by shortly pressing the set button four times, with help from the vol/sel rotary knob the lowering of the volum e level (“mute”) for receptions on t...

  • Page 31: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 30 ever on: the external audio input is always on, even during radio receptions and transmit mode. Use this setting only for very high priority acoustic warnings, e.G. Collision warning beep ton...

  • Page 32: 3.6  Mic Type

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 31 doc.-no. 01.143a.010.71e / revision 1.00 3.6 mic type – selection microphone type the next option in the configuration menu is the setting of the microphone type. Selecting the microphone type switches the individual microphone inpu...

  • Page 33: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 32 act 123.450 sby 118.275 micl std sens: 6 range 0 – 9 act 123.450 sby 118.275 micl dyn sens: 6 range 0 – 9 act rx 123.450 sby 118.275 micr std sens: 4 range 0 – 9 act rx 123.450 sby 118.275...

  • Page 34: 3.8

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 33 doc.-no. 01.143a.010.71e / revision 1.00 3.8 head out – headset configuration the menu item head out determines whether one headset output is used or whether both headset outputs are used for separate control. Act rx 123.450 sby 118...

  • Page 35: 123.450

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 34 act rx 123.450 sby 118.275 auto on off 3.10 fw /sw – firmware / software version the firmware or the software version of the device is displayed here. No settings are possible. Display firmwa...

  • Page 36: 3.11 Master Reset

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 35 doc.-no. 01.143a.010.71e / revision 1.00 3.11 master reset – reset to factory settings with following procedure all configurations are reset to the factory settings. Switch of the device. Press mem button and dw button and switch th...

  • Page 37

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 36 3.13 overview configuration menu (setup).

  • Page 38: 4  Installation

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 37 doc.-no. 01.143a.010.71e / revision 1.00 4 installation 4.1 advice and tips the following suggestions should be considered before installing the assigned installation company could perform wiring. For diagrams refer to chapter 0- wi...

  • Page 39: 4.5  Mounting

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 38 4.5 mounting in cooperation with a maintenance shop, location and kind of the installation are specified. The maintenance shop can supply all cables. Suitable sets of cables are available fro...

  • Page 40: 4.7  Wiring

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 39 doc.-no. 01.143a.010.71e / revision 1.00 4.6.2 headset connection two headphones of the same type can be connected in parallel for each input. The total impedance in this case must not be less than 100Ω. 4.6.3 audio-input the extern...

  • Page 41

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 40 4.7.2 connector – pin allocation d-sub connector of the atr833a-ii seen from solder side pin names functionality 1 lsp(+) output external loudspeaker positive 2 head-0 (+) output headset-spea...

  • Page 42

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 41 doc.-no. 01.143a.010.71e / revision 1.00 11 +14 / +28v-pwr input power supply +12v 12 +14 / +28v-pwr input power supply +12v 13 batt (-) ground side of power supply 14 mic r gnd input microphone right ground 15 ptt-0 push-to-talk 0 ...

  • Page 43

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 42 4.7.3 wiring with cable harness bsks833x-s 4.7.3.1 overview / variants of cable sets five different cable sets are available for a wide range of applications bsks833s-s basic cable-set for si...

  • Page 44: 4.8  Antenna

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 43 doc.-no. 01.143a.010.71e / revision 1.00 byte # value description 1 0x02 (stx) synchronization 2 0x72 (‘r’) synchronization 3 id id of message 4…3+n n data bytes depending on message 4+n checksum xor of bytes #2 … #3+n i.E. Excludin...

  • Page 45

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 44 4.8.2 installation recommendation take note of the antenna manufac turer’s instructions. The metallic contact between airplane surface and antenna-gnd must be very good. On non-metallic airpl...

  • Page 46

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 45 doc.-no. 01.143a.010.71e / revision 1.00 4.10 post-installation check when installation is completed all steering and control functions of the aircraft are to be examined, in order to exclude disturbances by the wiring. The swr shal...

  • Page 47: 4.11 Drawings

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 46 4.11 drawings 4.11.1 dimensions the d-sub-connector (plug) has to be clamped with both spring locks. It is recommended to additionally secure them with a cable tie..

  • Page 48

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 47 doc.-no. 01.143a.010.71e / revision 1.00 4.11.2 mounting advices panel cut-out: 160x42mm rectangular, transversely aligned, within view and reach of the pilot. Attachment directly to the instrument panel, using parts from mounting s...

  • Page 49: 5  Appendix

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 48 5 appendix 5.1 frequency/channel-plan in the following table examples for operating and displayed frequencies in the range between 118.000 ... 118.100 mhz are given. This table can be continu...

  • Page 50

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 49 doc.-no. 01.143a.010.71e / revision 1.00 5.2 technical datah=38,5mm / b=140mm / t=161mm general compliance etso-2c169a transceiver class 4, 6 receiver class c, e, h1 & h2 etso 2c128 dimensions metal housing height: 38,5 mm (1,49 in)...

  • Page 51

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 50 compass-safe distance 30 cm intercom-input microphone inputs are connected to the intercom input. 100 mv rms at the microphone input produce 0,5w output power at the headphone (300 Ω). Nf (au...

  • Page 52

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 51 doc.-no. 01.143a.010.71e / revision 1.00 5.3 environmental conditions characteristics do –160f section cat condition temperature / altitude 4.0 c1 low ground survival temperature 4.5.1 – 55°c low operating temperature 4.5.1 – 20°c h...

  • Page 53

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation doc.-no. 01.143a.010.71e / revision 1.00 52 characteristics do –160f section cat condition audio frequency conducted susceptibility 18.0 b induced signal susceptibility 19.0 ac radio frequency susceptibility 20.0 t emission of rf energ...

  • Page 54

    Atr833a-ii / p/n 833-ii (axxx)-(axxx) operation and installation 53 doc.-no. 01.143a.010.71e / revision 1.00 notes:.

  • Page 56: F.U.N.K.E. Avionics Gmbh

    F f.U.N.K.E. F.U.N.K.E. Means – fabrication · utilities · network · know-how · engineering f.U.N.K.E. Avionics gmbh heinz-strachowitz-str. 4 de-86807 buchloe germany phone.: +49-8241 80066 0 fax.: +49-8241 80066 99 e-mail: service@funkeavionics.De www.Funkeavionics.De.