- DL manuals
- F.u.n.k.e.
- Transceiver
- ATR833A-OLED
- Operation And Installation
F.u.n.k.e. ATR833A-OLED Operation And Installation
Summary of ATR833A-OLED
Page 1
F f.U.N.K.E. F.U.N.K.E. Means – fabrication · utilities · network · know-how · engineering operation and installation (dokument-nr. 01.1411.010.71e) p/n 833a-(xxx)-(1xx) atr833a-oled vhf communication transceiver.
Page 3
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 2 dokument-nr.: 01.1411.010.71e / revision: 3.00 change history revision date description of change 1.00 20.07.2010 fav – first release – 2-knob-hmi 1.01 31.08.2010 new operation function sw v6.1 microphone-muting for single-ptt squelch defau...
Page 4: Contents
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 3 dokument-nr.: 01.1411.010.71e / revision: 3.00 contents 1 general ......................................................................................... 5 1.1 symbols .........................................................................
Page 5
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 4 dokument-nr.: 01.1411.010.71e / revision: 3.00 3.5.2 mld – left dynamic microphone input sensitivity ...... 27 3.5.3 mrs – right standard microphone input sensitivity ... 27 3.5.4 mrd – right dynamic microphone input sensitivity ... 27 3.6 ...
Page 6: 1 General
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 5 dokument-nr.: 01.1411.010.71e / revision: 3.00 1 general this manual contains information about the physical, mechanical and electrical characteristics, as well as information about installation and operation of the aeronautical vhf voice r...
Page 7: 1.3 Customer Support
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 6 dokument-nr.: 01.1411.010.71e / revision: 3.00 1.3 customer support in order to facilitate a rapid return of shipments in case of repairs, please follow the instructions of the input guide “reshipment rma” provided at the service-area withi...
Page 8: 2 Operation
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 7 dokument-nr.: 01.1411.010.71e / revision: 3.00 2 operation 2.1 controls change interchange active and standby frequency dw activate / deactivate dual watch reception of standby frequency set short press: choose item to be adjusted with very...
Page 9
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 8 dokument-nr.: 01.1411.010.71e / revision: 3.00 on/off switch on press button for approx. 0.5 s switch off press button for approx. 2 s dual watch activates/deactivates the mode for mutual reception of standby frequency (indicated by “dw” in...
Page 10: 2.2 On/off
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 9 dokument-nr.: 01.1411.010.71e / revision: 3.00 2.2 on/off turn the device on with on: press button for 0.5 s off: press button for 2 s after turning-on the display shows the software version as follows: (example) device name atr833a softwar...
Page 11
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 10 dokument-nr.: 01.1411.010.71e / revision: 3.00 display meaning remark act fixed label for active frequency sby label for standby frequency, when no dual watch activated dual watch mode allows intermittent monitoring of standby frequency ac...
Page 12: 2.4 Basic Settings
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 11 dokument-nr.: 01.1411.010.71e / revision: 3.00 display meaning remark ext 02 volume of external audio- signals set to 00, if no external device attached, to prevent noise pickup mem 00 item from user memory substitutes standby frequency; c...
Page 13
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 12 dokument-nr.: 01.1411.010.71e / revision: 3.00 2.4.1 vol - volume can be reached by a long press of the button, but is also automatically chosen by the radio after 12 seconds of user inactivity. Adjusts the volume of received radio signals...
Page 14
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 13 dokument-nr.: 01.1411.010.71e / revision: 3.00 2.4.3 dim – display brightness by short pressing the key twice, with help from the rotary knob the display’s illumination can be adjusted. Act 123.450 sby 118.910 dim 08 2.4.4 vox - voice acti...
Page 15
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 14 dokument-nr.: 01.1411.010.71e / revision: 3.00 2.4.5 dwm - dual watch mute by short pressing the key four times, with help from the rotary knob the muting of the volume level for receptions on the standby frequency (when having dual watch ...
Page 16
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 15 dokument-nr.: 01.1411.010.71e / revision: 3.00 2.4.7 ext - volume of the external audio input by short pressing the key six times, with help from the rotary knob, the volume from the connected external audio signals (warning tones, music, ...
Page 17: 2.5 Frequency Setting
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 16 dokument-nr.: 01.1411.010.71e / revision: 3.00 2.5 frequency setting frequency setting is always done by the two steps of 1. Entering a new standby frequency to the desired value, and then 2. Interchanging the new standby frequency and the...
Page 18
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 17 dokument-nr.: 01.1411.010.71e / revision: 3.00 when having the channel selection configured for 8.33 khz steps, the frequency is input in three steps: 123.450 → 123.450 → 123.450 when having the channel selection configured for allowing 25...
Page 19
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 18 dokument-nr.: 01.1411.010.71e / revision: 3.00 alternatively, the memory access automatically ends after a timeout, or can be ended by pressing twice. The former standby frequency has now been substituted by the frequency selected from the...
Page 20
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 19 dokument-nr.: 01.1411.010.71e / revision: 3.00 step • display (example) 1. Have frequency to be stored set as active frequency act 124.350 sby 135.700 vol 03 2. Enter memory list: • press once in order to access the user memory. (this over...
Page 21
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 20 dokument-nr.: 01.1411.010.71e / revision: 3.00 6. Enter the name • by changing the selected character with , and advancing the selection with , just as when manually entering a standby frequency. Act 124.350 sby 124.350 mem 17 konstanz 7. ...
Page 22
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 21 dokument-nr.: 01.1411.010.71e / revision: 3.00 in order to have an audible distinction between receptions on the active and the standby frequency, it is possible to have the volume of the receptions from the standby frequency with a lower ...
Page 23: 2.7 Transmission
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 22 dokument-nr.: 01.1411.010.71e / revision: 3.00 2.7 transmission by pushing the ptt button, the device starts transmission on the active frequency. The operation of the transmission is indicated by “tx” in front of the frequency used. Act t...
Page 24: 3 Configuration
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 23 dokument-nr.: 01.1411.010.71e / revision: 3.00 3 configuration a very long press of (5 seconds) accesses the configuration menu. The configuration menu is used for fundamental settings. To choose between the following settings, use the but...
Page 25
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 24 dokument-nr.: 01.1411.010.71e / revision: 3.00 a short press of switches to the next configuration item, a long press of exits the configuration menu. 3.2 energy saving mode – automatic display darkening in order to save energy – and to ex...
Page 26: 3.3 Ptt-Button Selection
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 25 dokument-nr.: 01.1411.010.71e / revision: 3.00 a short press of switches to the next configuration item, a long press of exits the configuration menu. 3.3 ptt-button selection in case of using two external ptt buttons, this configuration i...
Page 27
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 26 dokument-nr.: 01.1411.010.71e / revision: 3.00 3.4 ext – external audio input’s behavior the external audio input can be used to feed a monaural audio signal to the amplifier for the headsets/speaker. An external audio signal can be used f...
Page 28
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 27 dokument-nr.: 01.1411.010.71e / revision: 3.00 3.5 microphone input sensitivity (mls/mld/mrs/mrd) 3.5.1 mls – left standard microphone input sensitivity 3.5.2 mld – left dynamic microphone input sensitivity 3.5.3 mrs – right standard micro...
Page 29: 3.6 Tst - Test Mode
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 28 dokument-nr.: 01.1411.010.71e / revision: 3.00 a short press of switches to the next configuration item, a long press of exits the configuration menu . 3.6 tst - test mode the last option in the setup mode is the test mode. The test mode i...
Page 30: 4 Installation
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 29 dokument-nr.: 01.1411.010.71e / revision: 3.00 4 installation 4.1 advices and tips the following suggestions should be considered before installing the assigned installation company could perform wiring. For diagrams refer to section 4.7 w...
Page 31: 4.5 Mounting
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 30 dokument-nr.: 01.1411.010.71e / revision: 3.00 4.4 unpacking and inspecting the equipment carefully unpack the equipment. Damages due to transportation must be reported to the shipping company immediately. Save the shipping container and a...
Page 32
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 31 dokument-nr.: 01.1411.010.71e / revision: 3.00 4.6 equipment connections one 25 pin d-sub miniature connector includes all electrical connections, except for the antenna. 4.6.1 microphone-connection microphone left right standard mls mrs d...
Page 33
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 32 dokument-nr.: 01.1411.010.71e / revision: 3.00 4.6.3 audio-input the external audio input can be used for the input of warn tones or music etc. In order to avoid disturbances while this input is not used, the respective wire needs to be sh...
Page 34: 4.7 Wiring
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 33 dokument-nr.: 01.1411.010.71e / revision: 3.00 4.7 wiring 4.7.1 conductor cross section power supply (power, gnd): awg18 (0.96 mm²) signals: awg22 (0.38 mm²) the conductors used must be approved for aircraft installation. 4.7.2 connector –...
Page 35
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 34 dokument-nr.: 01.1411.010.71e / revision: 3.00 8 mic-l-dyn mld+ input dynamic microphone (glider/gooseneck) pilot/left 9 data-rx rs232 rx (for remote control) 10 do not connect 11 +12v-pwr +ub input power supply +12v 12 +12v-pwr +ub input ...
Page 36
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 35 dokument-nr.: 01.1411.010.71e / revision: 3.00 4.7.3 wiring with cable harness bsks833s/bsks833d 4.7.3.1 overview.
Page 37
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 36 dokument-nr.: 01.1411.010.71e / revision: 3.00 4.7.3.2 connector rmt for remote control this connector contains the serial interface and the power supplies for the remote control unit. Mstr = master radio connector for the remote control i...
Page 38: 4.8 Antenna
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 37 dokument-nr.: 01.1411.010.71e / revision: 3.00 4.8 antenna 4.8.1 antenna selection • a vhf-com-antenna with an impedance of 50 ohm is required. • choose an antenna type approved for the aircraft and the mounting location. • the antenna sho...
Page 39
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 38 dokument-nr.: 01.1411.010.71e / revision: 3.00 • assemble the antenna in vertical position so on or under the belly that it is as far distant as possible from all protruding parts (propeller, chassis, vertical stabilizer) • for glider inst...
Page 40: 4.11 Accessories
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 39 dokument-nr.: 01.1411.010.71e / revision: 3.00 4.10 post-installation check when installation is completed all steering and control functions of the aircraft are to be examined, in order to exclude disturbances by the wiring. The swr shall...
Page 41: 4.12 Drawings
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 40 dokument-nr.: 01.1411.010.71e / revision: 3.00 4.12 drawings 4.12.1 dimensions ≈ 8 0 m m 3 8 ,5 m m 160 mm 1 6 1 m m 15 mm 14 mm 140 mm 20 mm 4 1 ,3 m m 148 mm 3 0 m m o 4,3 mm / the d-sub-connector (plug) has to be clamped with both sprin...
Page 42
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 41 dokument-nr.: 01.1411.010.71e / revision: 3.00 4.12.2 mounting advices panel cut-out: 160 x 42 mm, horizontal aligned, in viewable and reachable position to the pilot use the standard mounting blocks of mounting block set mb833as (included...
Page 43: 5 Anhang
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 42 dokument-nr.: 01.1411.010.71e / revision: 3.00 5 anhang 5.1 frequency/channel-plan in the following table examples for operating and displayed frequencies in the range between 118.000 ... 118.100 mhz are given. This table can be continued ...
Page 44: 5.2 Technical Data
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 43 dokument-nr.: 01.1411.010.71e / revision: 3.00 5.2 technical data general compliance etso-2c37e,ed-23b class 4, 6 etso-2c38e,ed-23b class c, e standard tso-c37d, rtca do-186a class 4, 6 tso-c38d, rtca do-186a class c, e dimensions height: ...
Page 45
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 44 dokument-nr.: 01.1411.010.71e / revision: 3.00 transmitter power output 6 w (nominal) 4 w (minimal) harmonic distortion sidetone output >0,5w into 300 Ω (per headphone) microphone inputs 2 x standard (50mv…2v) into 100 Ω 2 x dynamic microp...
Page 46
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 45 dokument-nr.: 01.1411.010.71e / revision: 3.00 5.3 environmental conditions characteristic do–160d section cat condition temperature / altitude 4.0 c1 low ground survival temperature 4.5.1 – 55°c low operating temperature 4.5.1 – 20°c high...
Page 47
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 46 dokument-nr.: 01.1411.010.71e / revision: 3.00 characteristic do–160d section cat condition induced signal susceptibility 19.0 a radio frequency susceptibility 20.0 tt emission of rf energy 21.0 m lightning induced transient susceptibility...
Page 48
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 47 dokument-nr.: 01.1411.010.71e / revision: 3.00 notes:.
Page 49
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 48 dokument-nr.: 01.1411.010.71e / revision: 3.00
Page 50
Atr833a / p/n 833a-(xxx)-(1xx) operation and installation 49 dokument-nr.: 01.1411.010.71e / revision: 3.00
Page 52: F.U.N.K.E. Avionics Gmbh
F f.U.N.K.E. F.U.N.K.E. Means – fabrication · utilities · network · know-how · engineering f.U.N.K.E. Avionics gmbh heinz-strachowitz-str. 4 de-86807 buchloe germany phone.: +49-8241 80066 0 fax.: +49-8241 80066 99 e-mail: service@funkeavionics.De www.Funkeavionics.De.