Video light safety tips to prevent damage to your f&v product or injury to yourself or to others. Read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. Pro150\150d video light user guide.
Warning to prevent fire or electric shock, please do not let the rain hit the device or humid 1. Please use the voltage carefully, use of non-original match or without of the provisions power supply voltage will damage the equipment or the light source equipment can not start, can not use too big of...
Use dry soft cloth to clean photographic lights. You can wash with a cloth slightly some neutral detergent to remove difficult to remove the dirt, and then with a soft cloth to dry. Do not use strong cleaning agents, such as thinner, gasoline or alcohol, as these solvents may damage the surface of t...
-3- a photography lights will be installed in the camera or photographic camera lights before removed, is required to set the power switch in off. Parts diagram photography lights installed photographic lights removed the use for photographic light 1. The opposite direction along the arrow anti-cloc...
1. Make sure the light bulb have been adequately cooled to touch, turn on the screws at the bottom of the light front cover, removed the front cover, 2. Replacement bulbs ① to replace old light bulbs, use the new bulbs casing to masked the old light bulb, then use the casing and pull it out. ② strai...
