F&V R-3 II User Manual - page 3
Use dry soft cloth to clean photographic light.You can clean with a cloth slighty
some neutral detergent to remove stubborn dirt and then with a soft cloth to dry.
Do not use strong cleaning agents, such as thinner, gasoline or alcohol, as these
solvents may damage the surface of the protective layer
1. Please do not directly face the light bulb when the
Photographic light on.
2. Never block the ventilation grille by covering it with paper
or clothes . could result in injury.
3. Water or any liquid spill into it could cause short circuit or
result in injury.
4. Do not place the photographic light nearby alcohol or gasoline
and other flammable or volatile solvents.
5. When the photographic light on or against the other items above,
please turn off the photographic light,or else they may cause fire or damage to
photographic light.
6. Do not seize the photographic light head to take up photography cameras.
Working Voltage
Average Life time
Illuminance (LX)
Color rendering
Soft mode
Box volume
Notes
Specifications
Notes on the clean
5.8~8.4V
30000 h
600
Soft-film standard
127 x 72 x 100mm
Watt loss
Cooling mode
Color temperature (K)
Illumination angle
Packing Piece
10w
5600K/3200K
60
3200k standard filter
330g
color temperature
Transform
Heat sinks, natural
ventilation
-2-
Design and specifications subject to change without notice.
Parts diagram
1. Dimming switch
2. Mains switch on/off
3. Battery lock
4. Hot shoes locking knob
5. Barn door
6. Soft-film
7. Amber film