F5 WANJet 400 Appliance Quick Start Card

IP address>:10000. (If you set up the 

Management port, use the Mgt IP Address 

instead.) The WANJet appliance login screen 

opens.

2  

Type the user name and password (the defaults 

are both admin), and then click Log On. The 

Web UI opens and displays the WANJet Status 

screen.

1  

In the WANJet Status screen, click the Not 

entered link, next to License, to display the 

WANJet License Details screen.

2  

After Base Registration Key, you should see 

your registration key (fi lled in at the factory).

3  

Click Next. 

The EULA (End User License Agreement) 

screen opens.

4  

Read the EULA, and then click Accept if 

you agree to the conditions. When license 

activation is complete, the WANJet License 

Details screen opens and shows the current 

license date. 

Note: If automatic license activation does not work, 

you can use manual activation instead. On the 

WANJet License Details screen, next to Activation 

Method, select Manual and follow the directions on 

the screen.

Next, you can complete the confi guration of the 

WANJet appliance including changing the default 

password, specifying remote WANJet appliances, 

and setting up optimization, IT service, and QoS 

policies. See the WANJet Appliance Administrator 

Guide for details.

7  Log on to the WANJet 400 appliance 

Finally, check that you can log on to the appliance remotely, and activate the license. 

To log on  

To activate the license