740-741.
) attention! To ensure the safety of people, it is important that you read all the following instructions. Incorrect installation or incorrect use of the product could cause serious harm to people. 2) carefully read the instructions before beginning to install the product. 3) do not leave packing ma...
2 fig.01 fig.02 these instructions apply to the following models: faac 740 - 74 the 740-741 gearmotor is an electro-mechanical operator designed for moving sliding gates. The non-reversing reduction system ensures the gate is mechani- cally locked when the gearmotor is not operating, therefore it is...
. Maximum use curve the curve makes it possible to establish maximum work time (t) according to use frequency (f). With reference to iec 34-1 stan- dard, the 740-741 gearmotor with an s3 duty, can operate at a use frequency of 30-40%. To ensure efficient operation, it is necessary to operate in the ...
4 fig.10 5.4. Assembling the rack 5.4.. Steel rack to weld (fig. ) 1) fit the three threaded pawls on the rack element, positioning them at the bottom of the slot. In this way, the slot play will enable any future adjustments to be made. 2) manually take the leaf into its closing position. 3) lay th...
5 fig.19 fig.20 1) assemble the two magnets as indicated in figure 18. 2) prepare the operator for manual operation, as indicated in paragraph 8, then power up the system. 3) manually move the gate into the open position, leaving 40 mm from the travel limit mechanical stop 4) slide the magnet closes...
Automated system 740-741 read the instructions carefully before using the product and keep them for future consultation. General safety rules if installed and used correctly, the 740-741 automated system will ensure a high degree of safety. Some simple rules regarding behaviour will avoid any accide...
Registro di manutenzione no . Date job description signatures 1 te chnician customer 2 te chnician customer 3 te chnician customer 4 te chnician customer 5 te chnician customer 6 te chnician customer 7 te chnician customer 8 te chnician customer 9 te chnician customer 10 te chnician customer install...
Note - notes - note - notas - anmerkung - opmerkingen.
Le descrizioni e le illustrazioni del presente manuale non sono impegnative. La faac si riserva il diritto, lasciando inal- terate le caratteristiche essenziali dell’apparecchiatura, di apportare in qualunque momento e senza impegnarsi ad aggiornare la presente pubblicazione, le modifiche che essa r...
