Faber VASKA C11 User Manual - page 3
GB
GB 3
GB
GB 2
2. INTRODUCTION
In addition to information about setting-up the appliance, its
operation and maintenance, these instructions for use also contain
advice about its safe use. By reading this manual you will quickly
become familiar with the operation and use of the appliance
The Direct vent built-in appliances are designed for installation in
living areas. The special Direct vent connections allow you to install
the inserts in well-sealed living areas or areas that were insulated
after construction.
The appliance has a sealed combustion chamber and should be
installed as a sealed appliance. The flue gases are drawn outside by
the natural draught of the apparatus itself with a combination intake
and exhaust. This same natural draught draws in the air needed for
combustion.
This system of concentric pipes can be equipped with a wall or roof
vent outlet. To maintain the proper natural draught, there must be a
minimum of one meter of concentric pipe above the appliance before
the wall or roof outlet.
The Vaska C11 is equipped with a series 9000 SIT OXYPILOT. This
protective device comes into operation if the concentration of carbon
dioxide in the combustion air supply becomes too high (more than
2% CO2). This can happen if the chimney has insufficient draught. If
the protective device comes into operation regularly, you should
consult your installer.
1. FOREWORD
Congratulations on the purchase of your new Faber International
appliance. You have made an excellent choice. A Faber product is a
guarantee of years of burning comfort. Faber combines durable
materials with balanced techniques.
The Vaska C11 is a Direct vent appliance. Thanks to the Direct-vent
connection, the appliance can be installed in a draughtproof or fill-
insulated house
Read the manual carefully before using your appliance and then keep
the manual in a safe place.
Warranty:
Be sure to keep both you warranty certificate and your
receipt. Please quote the serial number when making service
requests. This number can be found on the data plate on the inside
of the door