Factor Electronics PRO-SUB12A Owner's Manual - page 8
info@factorelectronics.com
www.factorelectronics.com
PRO-SUB12A Installation & Setup
The PRO-SUB12A provides several different mounting options:
1. Traditional floor standing:
The PRO-SUB12A provides four large
rubber feet for floor standing installations.
The rubber feet help to isolate the sub-woofer
from the floor and also keep the sub-woofer
from changing positions due to vibrations.
3.
Wall Mounting (with the optional SPK-WALL-MNT):
The SPK-WALL-MNT can be purchased from your
Factor Electronics dealer and be used to wall-mount
the PRO-SUB12A.
2. Pole Mounting Additional Speakers:
The PRO-SUB12A provide a sturdy metal pole cup
1-3/8” diameter for mounting additional speakers.
4. Hanging / Flying: (with optional Factor M-10 Fly Bolts):
The PRO-SUB12A provides 6 x M-10 fly points on the cabinet
for hanging/ flying from ceilings and trusses. There are four fly
points on the back of the PRO-SUB12A and two fly points on
the top of the cabinet. This provides a variety of hanging positions
Including strait down or angled with multiple angle adjustments.
8
8