Owners manual info@factorelectronics.Com www.Factorelectronics.Com owners manual factor electronics vt-1 / vt-4 professional tuners with rbds premium audio video lighting and power products.
Important note: this owner's manual is provided as an installation and operating aid. Factor electronics does not assume any responsibility as to its accuracy and shall not be liable in tort or contract for any direct, consequential or incidental loss or damage arising from the installation, use or ...
Introduction congratulations and thank you for purchasing factor electronics products. The factor electronics “vt” series digital tuners are designed and built to provide ultra reliable performance for professional background music and multi-room multi- source audio applications. All factor electron...
Quick start guide diagram a 1 connect the rca outputs to your amplifier 2 connect the included am antenna 3 connect the included fm antenna 4 after all your connections are made plug the ac power cord in 5 after all your connections are made press the power switch on 7 after all your connections are...
Vt-1 vt-4 ir remote control - the vt-1 and vt-4 tuners include an ir remote control. All the front panel buttons on the tuners are repeated on the remote control. Use the remote to control the tuner functions within 30 feet of the tuner maintaining line of sight for best results. The vt-1 vt-4 remot...
Tuner select the vt-4 provides 4 independent tuners. Press tuner buttons 1,2,3 or4 to select the tuner you wish to control. When using the vt-1 tuner these buttons will have no effect. Station presets the pre-set buttons provide access to the tuner per-sets and work in conjunction with the am/fm, au...
Vt-1/ vt-4 remote functions 10 11 12 front panel operation and connections power on/off - the power switch applies power to the tuner. Tune/ tuner volume knob - this push/turn knob has dual functions. 1) turn the knob clockwise or counter clockwise to adjust the output level of the tuner (radio) sou...
Front panel operation and connections preset buttons 1-6 - the pre-set buttons provide access to the tuner per-sets and work in conjunction with the am/fm, auto scan, memory and clear buttons. Press pre-set buttons 1-6 to instantly recall stations once stations are stored in the pre-set memory. To i...
Front panel operation and connections auto scan – press the auto scan button and hold for three seconds. The tuner will scan all am or fm stations and load them into the internal memory in ascending order. This will overwrite all saved pre-sets. Note: if the tuner is in am mode before pressing the a...
Rear panel operation and connections rear panel vt-1 rear panel vt-4 info@factorelectronics.Com www.Factorelectronics.Com.
Rs232 control – this jack provides remote control of all tuner functions using a personal computer. Connect the rs232 jack of your computer to the rs232 jack on the back panel or use a usb to rs232 (db9) converter to access these functions. The vt series tuners include free software on the factor el...
Specifications vt-1 vt-4 tuner specifications fm line level outputs 2vrms 2vrms tuning frequency 87.5mhz to 108 mhz 87.5mhz to 108 mhz usable sensitivity less than 12uv less than 12uv s/n ratio better than 50 db better than 50 db thd 0.2 percent 0.2 percent frequency response 30hz-15,000 hz 30hz-15,...
