1. DL manuals
  2. Factor
  3. Amplifier
  4. PRESENTER ONE
  5. Operation Manual

Factor PRESENTER ONE Operation Manual

Manual is about: Modulized Wireless Portable Amplifier System

Summary of PRESENTER ONE

  • Page 1

    Modulized wireless portable amplifier system iso 9001:2008 green product operation manual.

  • Page 2

    -1- presenter one operation manual congratulations and thank you for purchasing this all-in-one portable sound system. To ensure a trouble-free operation, please read the manual thoroughly to fully understand its controls and functions. Presenter one can be installed with up to 4 receiver modules, o...

  • Page 3

    Iso 9001 / iso 14001 / ohsas 18001 -2- presenter one parts and functions a,b,c&d. Receiver or mp3 module c can be transmitter module 1. Mic volume control 2. Line-in volume control 3. Tape/dvd power+volume control 4. Tone voulme control (bass) 5. Tone voulme control (treble) 6. Master volume control...

  • Page 4

    -3- presenter two parts and functions a,b. Receiver or mp3 module b can be transmitter 1. Audio link input 2. Audio link output 3. Volume control 4. Speaker out (switched) 5. Speaker out (unswitched) 6. 24~32v dc input 7. Fuse 8. Power status indicator (red) 9. Power status indicator (green) 10. Cha...

  • Page 5

    Iso 9001 / iso 14001 / ohsas 18001 -4- operating procedures after unpacking the unit for the first time, please charge the unit for at least 6 hours before operation. This is absolutely necessary as the built-in rechargeable batteries might have been discharged naturally due to long shipment and sto...

  • Page 6

    -5- wired audio link the presenter one could be operated as master as well as slave. This depends on the setting of master/slave selector switch. However, the challenger slave can only be operated as slave. In order to operate audio link, you must have a presenter one unit that operates as a master....

  • Page 7

    Iso 9001 / iso 14001 / ohsas 18001 -6- wireless audio link different from wired audio link, with new slave's capability of installation of receiver and transmitter modules it eliminates all cable connection and largely extends the number limit of slaves. Application: for crowds of 1000 to 2000, e.G....

  • Page 8

    -7- sdr-6216m receiver module 1 2 3 4 5 6 7 1. Channel indicator 2. Power switch/volume control 3. Channel selector 4. Microphone battery weak indicator 5. Diversity a/b indicator 6. Channel scanner 7. Squelch control first turn on the power of the main unit. Then turn on the individual power of the...

  • Page 9

    Iso 9001 / iso 14001 / ohsas 18001 -8- rp-6016m transmitter module 1 2 3 4 5 6 1. Channel indicator 2. Antenna socket(tnc type) 3. Channel selectors: press ▲(up)▼(down) to increase/decrease channel number. Please select a non-interfering frequency channel to those used in the receiver modules. 4. Po...

  • Page 10

    -9- operating the cd player parts and functions 1 2 3 4 5 6 7 8 9 10 11 1. Lcd display 2. Play/pause 3. Stop 4. Rev-skip-cue 5. Eject 6. Cd/usb selector 7. Repeat 8. Folder skip 9. Infrared receiving led 10. Usb input 11. Power/volume control keys functions panel remote play/pause when this key is p...

  • Page 11

    Iso 9001 / iso 14001 / ohsas 18001 -10- folder-up in stop mode: skip the starting play folder to next folder during stop mode, cyclic to the first folder if it is in the last folder. In program entry mode: change the file for program select to next folder’s first file, cyclic to the first folder if ...

  • Page 12

    -11- uhf handheld microphone（sq-5016） parts and functions 2 3 4 5 6 9 11 7 8 1 10 1. Cartridge 2. Battery weak/power led 3. Power switch 4. Lcd 5. Battery compartment 6. Bottom cap 7. Locking button 8. Setting button 9. Up button 10. Charging port 11. Down button battery installation insert or repla...

  • Page 13

    Iso 9001 / iso 14001 / ohsas 18001 -12- press up or down button to move the cursor to either nimh (rechargeable battery) or akln (alkaline battery) position. When the desired battery has been selected, it will be automatically saved and stored in the memory. Remark: nimh battery must be selected whe...

  • Page 14

    -13- uhf beltpack transmitter（sm-5016） parts and functions 1. Antenna 2. Battery weak/audio mute indicator 3. Audio mute switch 4. (lavalier microphone) mini xlr connector 5. Lcd 6. Charging port 7. Cover release button 8. Power switch 9. Gain control (gt, high impedance) 10. Gain control (mt, low i...

  • Page 15

    Iso 9001 / iso 14001 / ohsas 18001 -14- 2. Making changes to battery selection use up or down button to go to the battery selection page. Press up or down button to move the cursor to either nimh (rechargeable battery) or akln (alkaline battery) position. When the desired battery has been selected, ...

  • Page 16

    -15- maintenance-free lead acid battery guidelines for maintenance-free batteries: 1. Battery should operate at temperatures between 15°c ~ 50°c. To ensure a longer life span, it should be kept between 5°c ~ 35°c. For optimum result, 20°c ~ 25°c will be ideal. When temperature falls 15 degrees below...